-
Posts
2,863 -
Joined
-
Last visited
Content Type
Forums
News
20th
EduGeek EDIT Conference
Blogs
Everything posted by twin--turbo
-
It's very easy to do, and the screens are available from Laptop Screens | Laptop Screen | Laptop LCD Screens | Replacement Laptop Screens | Broken Laptop Screen - Home cheep! make sure the battery is out and the system discharged. takes us about 10 minutes tops on most of our laptops but we do get a lot of them through the door.. Rob
-
Don't get into routing, they said.. It's rage-inducing, they said!
twin--turbo replied to Garacesh's topic in Wired Networks
what do you exactly mean by this? you have a switch connected to one side of the router for the internal network correct? and somethign on the outside being th internet? and vlan1 can be used just fine. to actualy connect the router to the internet your going to need to either have a public IP for each client PC or be running NAT. Rob -
Don't get into routing, they said.. It's rage-inducing, they said!
twin--turbo replied to Garacesh's topic in Wired Networks
a bridge is a router. -
We jumped from our RBC in 2009 after becomming an Academy, for us it was simple as we had never relied on the RBC for any service other than piping packets to our site. We ran/run our own firewall, filtering, Email, DNS, etc. So we just changed our DNS modded some server IP's and chucked the RBC router in a box till they bothered to recover it. Rob
-
(for reference) Name virtual host in apache . Rob
-
Speak to Wireless Network Wireless Bridge Wireless WiFi Ethernet Bridge Specialists Your situation sounds like a good candidate for Unifi, It does not need a registerd installer, but somone will have to understand it to do a decent job. Rob
-
Unless something massive has changed then no. we were on a hosted VLE providers Live@ and could see the addresses of every other user in every other school! We set up our own live@ for testing and could not segregate staff & students. We left students on Live, and setup exchange for staff. Even on exchange it seems virtually impossible to hide one set of users from another. I broke exchange lots and lots with adsiedit trying to disable address lists. Novell Groupwise was able to do it without any problems, shame we were forced to move off it. Rob
-
Internet Going Down / Rebooting Server Fixing
twin--turbo replied to CommodoreS's topic in Windows Server 2008 R2
what's doing DNS? Rob -
We have Clever's on trollies. Much more useful than a wall mounted screen and projector. And durable, I was asked to pucnh the demo one. I hurt my hand LOL.. Rob
-
Sounds like it's fully defunct then.
-
is there a cable connecting the 2 a DB25 if so the one that is down is waiting in failover mode. Rob
-
Got a 525 sitting in my dining room , not in service mind... Rob
-
Appart from some strange tape management issues , I quite like it. Better than DPM.
-
We just fix em. We would ratehr be charging back to departments but have been told not to do this. Rob
-
it will be https do https://ipofserver:10000 Rob
-
It means the Ethernets are not in use presently as long as it's not part of some failover then I guess that yes it's probably safe to remove. Which PIX is it? Rob
-
USB storage, and he uses it as a media server so it's capable of streaming HD. Not BALLS out performance but for £30 + a £50 1TB HDD it's a very low cost low power solution. Rob
-
VLAN & IP Range for VOIP system across 3 sites
twin--turbo replied to sidewinder's topic in Wired Networks
No need to push G711 (87Kb) over wan links, G729 will do fine at (41Kb). I can't tell the difference when calling between sites. Not that we need to save bandwidth on a 1Gb Pipe . Rob -
VLAN & IP Range for VOIP system across 3 sites
twin--turbo replied to sidewinder's topic in Wired Networks
if there is only one server and a few clients then just use one subnet and vlan. Rob -
My friend uses a Raspbery Pi as his Storage server. Rob
-
Unless it's a Chassis then it's covered, just need to be the original owner and know who supplied it. Rob
-
adding hubs to managed switch issues
twin--turbo replied to jjohnsoncantell's topic in Wired Networks
HA..... We had a full new install with cisco kit at our other site, twin 4507 cores and distribution and edge switches. It took 5 months to get the UN/PW out of the BIG installer. The day I got the details I swore so much the air turned blue. Our expensive network was using switches daisy chained 7 levels deep and with no redundancy. It took three months for them to agree that it was abysmal and come in and do it properly. Rob
