Simcfc73

I don't think I can use it... just checked and my file server upload time and it take it will finish in 1 year 10 months 22 days 11 hours 24 minutes 6 seconds

Hi, No idea why but I just can't get my head round VEEAM, I've run it for 7 months now and local backups are fine but trying to do external I've always hot walls. So I thought I would experiment with scale out and Backblaze. I've created my Backblaze account and setup the scale out on VEEAM but when I enabled it, it says that 99 backups were going to be copied to backblaze. Can anyone share their settings so I can work out what I am doing wrong. What I would like is 14 days on site and then weekly in the cloud for 4 weeks, then monthly for a year. Appreciate any help. So much easier in DPM IMHO

Utopia on Prime is a bit scary.. John Cusack is cropping up in a few things like this. Also watching Battlestar Galactica as I missed it first time round.

Which switches? Do you mix edge switches with the white ones? I'm slowly replacing our Netgear switches but haven't touched the backbone yet... got 18 left to do. Mainly been buying US-24-G1 and USW-16-PoE for now.

Maybe they should use these flouters for the clinical trial and get them to sign a waver for any future hospital treatment.

Agree with this, solved all my issues too.

I may be tempting fate but I may have fixed it.. abliet by opening up a bit too much which i am locking down as I type. I decided to move the APs onto a different management LAN and set a route back to the controller on VLAN 1. Worked really well (as soon as I remembered to set them to DHCP before setting the management VLAN), I set the Vlan and they picked u[p the new IP and registered with the controller. So now I need to work out what traffic to go between the VLANS, obviously the ports to register to the controller but I need to work out what to open up so the clients onthe VLAN get logged on via the portal and authenticated with my radius. Weird things too (probably not). If I set the port to the FW just with the VLAN tag it fails.. I have to tag them all. I thought it would work just with the port on the FW and the port connected to the switch on the same VLAN but it only works if VLAN 1 is tagged too.

I'm on 6.0.23 The wireless users is a bit overblown... only 7 on at the weekend and all these. Wonder if its why my wireless is so abysmal.

Ours doesn't work, we use Azure as a auth provider for Google so it can't talk to it.

I've watched a few of his videos... and Crosstalk solutions who walked me through my SIP setups. I'm actually at the point of looking at outside help to get this sorted as the strangeness is baffling. Earlier today I was able to connect through the BYOD without being authorised... it hit the XG logon page so bypassed all the Radius SSO I have setup. I created a new wireless connection with the same radius auth and it went to the right logon page and authenticated with radius on the XG box. I do think there's something a bit weird going on with roaming and my DHCP. I've got it running on VLAN 40 which gets dished out by the XG box... I've just roamed now and it lost its connection.. when I try and connect its already authorised by the Unifi controller but has been disconnected by the XG so I have to sign in again. So for some reason I'm getting a disconnected in the XG box. I was tempted to buy a USG just for my VLANs so at least I knwo they will talk to each other nicely and 'should' integrate.

Here is some more weirdness. I stupidly updated my controller to v6 and this morning 6.0.23 came out so I installed it hoping it would fix at least some of the issues. On my VLAN 40 with the Guest Portal assigned to it clients now ignore the portal page and go directly to the Sophos XG page... so Radius SSO is ignored. When I look at the clients on the UNIFI they have the option to Authorise.... so they are connecting to the WIFI directly without having to logon. Maybe something has changed in the update but I can't see it. - - - Updated - - - PS, the UNIFI Community is imploding a bit... worrying messages coming from it.

Hi, Just an update on this which has highlighted a situation but not a solution. If I have the access point on the network with no wireless networks attached to it then they ping perfectly. As soon as I add any wireless connections to them they start to act up. I've go 3 wireless networks. VLAN 1, 20 and 40 and I've experimented and it does it with them all.. even when I only add VLAN 1. I've just looked now an I can see the weird ping acting like below. As soon as I remove the wireless and reboot the switch it never misses a ping. Its been mentioned I may have a loop but I've checked and if there is I can't see it. I've tried port isolation.. stp off and on but nothing works. I actually thought it was something to do with my XG firewall as its routing from the VLAN to my main network for the intranet page but I've disabled that and its not that. I'm at the stage of moving the AP's and controller onto its own VLAN but its a bit of an effort when I don't even know if it will help. Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.183: bytes=32 time=1ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.183: bytes=32 time=2ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.

I thought it might be okay as they released 2 pretty much within a week... but guess not. One of the lovely things is you can assign wireless networks to groups of devices rather than having to have duplicate networks...which is a long time in coming. It doesn't populate the VLAN ID in the network view either.. which I hope is just cosmetic. The new alpha management screens has lots of cool features all greyed out.

Noticed there doesn't seem to be a pre-authentication and post-authentication on the console too.. and the new Alpha management screen is weird.

I decided to use GAM and excel along with the sheets plugin classroom Manager.. we a small school and I can easily make all the classes and assign staff pupils to them, Might not be automated but free

Its random. One area I always had issues with where the AP would vanish I ended up swapping for another AP.. same cable and switch and it seems to be much better but I reckon there's 4 doing similar things so I didn't think it would be a hardware issue. The other area that's terrible (from the ping above) is plugged into a UI switch now after being plugged into a Netgear one. I've used Wireshark to mirror the port but there's nothing obvious that's wrong.. I can see a ubiquiti multicast every now and again but nothing much to report. I've got it to work on an offline setup.. but when it goes online they break.. I've tried different cables, switches but they just act up. Its almost like there's something on the network that they don't like but I've checked everything and I can't see it.

I've disabled STP but still weird. An example of pinging today.. then all of a sudden on its own it comes back to life. Stupid thing Reply from 192.168.100.185: bytes=32 time=2ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time=8ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time=1ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time=1ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time=1ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time<1ms TTL=64Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time=2ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time=2ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time=3ms TTL=64Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Request timed out.Reply from 192.168.100.185: bytes=32 time=1ms TTL=64Reply from 192.168.100.185: bytes=32 time<1ms TTL=64Reply from 192.168.100.185: bytes=32 time=2ms TTL=64Reply from 192.168.100.185: bytes=32 time<1ms TTL=64Reply from 192.168.100.185: bytes=32 time=1ms TTL=64Reply from 192.168.100.185: bytes=32 time=2ms TTL=64Reply from 192.168.100.185: bytes=32 time=1ms TTL=64Reply from 192.168.100.185: bytes=32 time<1ms TTL=64Reply from 192.168.100.185: bytes=32 time=2ms TTL=64

Hi, Apologies if this has been asked before. I've got some really weird WIFI issues in school. For some reason some of my AP's will stop responding to pings for long periods.. I say stopped responding but they reply once every 6th ping. I can't SSH into them either but they sometimes come back to working but its very random. Rebooting the AP doesn't help, it goes back to the weird pings. I was told about the weird broadcast issues with Unifi and Netgear switches which I have been round and sorted but its still happening. Its been suggested its a network loop somewhere but I've triple checked and I cant see one and STP is on everywhere. I would love to rip out the Netgear stuff and stick new UI switches in. I've got 25 Netgear switches left and 5 new UI ones so its a costly upgrade. It is very random but its ruining some of the WIFI areas. Its very random and Wireshark doesn't show anything obvious, I can see some Ubiquiti broadcast traffic but nothing OTT. I did get unifi involved and got to the stage of RMAing them back but I'd tested it off my network and the AP's act perfectly so something is definitely amiss. Anyone seen anything similar?

Just FYI, its a Group policy that's causing this again and I can't find it. I ended up re-creating them back in May but its come back. Its also affecting new installs of Outlook where the MFA box pops up instantly and disappears.

My sync isn't working on the first day staff are back in.. grrrrr Its been working fine all through the summer. Getting error We can't sign you in at the moment The Edge team have been notified Error 5. 2. 0

Like de ja vu this.

Just started watching Star Girl on Prime.. surprisingly good addition to the DC universe.

That's a shame, was hoping it would be seamless.

Hi, I'm having a few issues with my unifi setup.. One is very annoying. When I move location it loses its sign on to the wi-fi... But when I click the 'sign on to access the wufi' it goes straight in without a prompt... usually. On some occasions I get access but no internet... And other times I get the Google error when it tries to redirect to they login page 'net::ERR_TOO_MANY_REDIRECTS' If I turn the wi-fi in the device off and on it sometimes comes back. I'm using radius which works fine and passes the logon accounting to sophos xg

Zombieland 2 - Doubletap Skip to the end credits... great cameo which is funnier than the rest of it.