ICTNUT Posted October 11, 2012 Author Posted October 11, 2012 Hi dblakeley, I agree with Edu-IT something is not right there. Have you applied the latest version that was released yesterday? 1
dblakeley Posted October 11, 2012 Posted October 11, 2012 Ah, I must of missed that earlier announcement. I'll give that a go and get back to you.
ICTNUT Posted October 11, 2012 Author Posted October 11, 2012 Ah, I must of missed that earlier announcement. I'll give that a go and get back to you. OK, let me know how you get on. We have not had any issues with either the Print Manager or Asset Manager not showing in this manner.
dblakeley Posted October 11, 2012 Posted October 11, 2012 Doesn't surprise me that we get weird issues to be honest. Standard fare around here! The upgrade has resolved the issues with everything I mentioned however. Thank you very much for the advice. I've got just 1 more query for now. Before purchasing we enquired if it'd be possible to import our school's timetable in to the Resource Booking system and were told it was possible. I apologise if it may have been mentioned earlier in the thread but is there anywhere I might find a bit of a 'how-to' for this?
chinesewhispers Posted October 11, 2012 Posted October 11, 2012 Just to say that the queue email addresses do seem to be working now, my testing was not thorough enough and was masking an issue. One question, a technician can have a primary queue, or all queues. Is there a way we can specify which queues they have responsibility for (more than one but fewer than all). Thanks 1
ICTNUT Posted October 12, 2012 Author Posted October 12, 2012 One question, a technician can have a primary queue, or all queues. Is there a way we can specify which queues they have responsibility for (more than one but fewer than all). Thanks Currently you can be linked to either one or all queues. The ability to choose any number of queues has been requested and is on the roadmap for v2.4 with the ETA being Jan 2013 - You can see more here: Roadmap - OP Software Issue Tracker
dclifton Posted October 30, 2012 Posted October 30, 2012 Hi, New to this software and thread and currently running v2.3.999.31395 and have noticed that the article controls on the knowledge base simply don't appear so I am unable to edit/delete/export an article. I never really noticed until I took a closer look at the online demo. It's probably something simple that I've missed but are there any ideas? Cheers Dan
dclifton Posted October 30, 2012 Posted October 30, 2012 (edited) Oops, scratch my previous post. It appears that there was an issue with a singular article and deleting it from the database was the way forward. Sorry Dan Edited October 30, 2012 by dclifton 1
jamesmay Posted October 30, 2012 Posted October 30, 2012 One of my technicians thinks he has a problem with adding printer manufacturers, has anyone else experienced this or is he just being stupid?
ICTNUT Posted October 30, 2012 Author Posted October 30, 2012 One of my technicians thinks he has a problem with adding printer manufacturers, has anyone else experienced this or is he just being stupid? What is the problem??
jamesmay Posted October 30, 2012 Posted October 30, 2012 Sorry, Well he adds a supplier to the print manger section and then it says its been added successfully but the is no sign of it...
synaesthesia Posted November 19, 2012 Posted November 19, 2012 Just a quicky - what's the best way of moving the SQL database to another machine?
ICTNUT Posted November 19, 2012 Author Posted November 19, 2012 Just a quicky - what's the best way of moving the SQL database to another machine? Create an empty database on the new server, backup the database on the old one, restore that datbase backup on the new server and then update your web.config file to point at the new database server. 1
Jonah Posted November 20, 2012 Posted November 20, 2012 We've just seen an odd issue - hardly an urgent request but may be worth looking at. In the Support Request Reports - the graphs are not ordering correctly, note the dates along the bottom in the attached image. Like I said, nothing major but it threw us for a few minutes when we were having a quick glance.
plexer Posted November 20, 2012 Posted November 20, 2012 We've just seen an odd issue - hardly an urgent request but may be worth looking at. In the Support Request Reports - the graphs are not ordering correctly, note the dates along the bottom in the attached image. Like I said, nothing major but it threw us for a few minutes when we were having a quick glance. [ATTACH=CONFIG]15947[/ATTACH] Yup both inflow and outflow show like that here as well. Ben
ICTNUT Posted January 28, 2013 Author Posted January 28, 2013 We've just seen an odd issue - hardly an urgent request but may be worth looking at. In the Support Request Reports - the graphs are not ordering correctly, note the dates along the bottom in the attached image. Like I said, nothing major but it threw us for a few minutes when we were having a quick glance. [ATTACH=CONFIG]15947[/ATTACH] Hi Jonah, I agree that calculation of these were a little off however from v2.4 onwards these have been revised and revamped as per the attached screenshot. You will see that the dates are much better and look good too :-)
reggiep Posted January 29, 2013 Posted January 29, 2013 Can I ask the same question as JamesMay as we are waiting for intergration with AD with SSO. Once you have this we will be buying OP smartdesk. Thanks
tomearnshaw Posted February 22, 2013 Posted February 22, 2013 Ordered OP Smartdesk on Monday and installed the same day. However I haven't yet been able to use it as the licensing servers are down at the moment supposedly for the release of the new version 'later this month'. Was really hoping to spend a bit of time working with it this half term...
Edu-IT Posted February 28, 2013 Posted February 28, 2013 2.4 is released! http://opsoftware.net/forums/forum_posts.asp?TID=38&title=opsd-v24-upgrade-notes 1
Tallwood_6 Posted March 5, 2013 Posted March 5, 2013 Be good if i could actually download the release, everytime i click on download i'm prompted to login again. Cant log a support call online as i dont seem to have the option, call support and your asked to log a call online and call sales and it just rings, less than impressed!
vikpaw Posted March 5, 2013 Posted March 5, 2013 Be good if i could actually download the release, everytime i click on download i'm prompted to login again. Cant log a support call online as i dont seem to have the option, call support and your asked to log a call online and call sales and it just rings, less than impressed! I haven't logged in since the last time that happened to me, nor upgraded for that matter. You can email them and they will get back to you eventually. I think it's [email protected]
Tallwood_6 Posted March 5, 2013 Posted March 5, 2013 I haven't logged in since the last time that happened to me, nor upgraded for that matter. You can email them and they will get back to you eventually. I think it's [email protected] Thanks i've opened a ticket with sales so i'm hoping this get routed to support.
tomearnshaw Posted March 6, 2013 Posted March 6, 2013 Hi All, Hopefully somebody can help or point me in the right direction! Have just started to set up 2.4 but are getting loops with emails. I have setup a dedicated email account on Exchange (internal) and set OP Smartdesk to poll this account using the account set up in AD for this mailbox. This works fine but when I log a request I get the following issue. If I ask a question in the case, it sends out a email fine and when I reply, the answer gets added to the case no problem. However, 10 minutes later, it gets added again. This happens every 10 minutes. If the case is closed, it will reopen it after 10 minutes. This happens until I delete the email. I can see that it has been polled as it is showing as read. Is there something I am missing or can I set something in Exchange to delete the email once it has been picked up? Cheers in advance ;-)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now