woodham

so you got your part exchange sorted then for your new place ? how did the negotiations go ?

baths don't need and shouldn't be grounded/bonded (well at least that's what the regs say unless you work for British gas then every bit of metal/pipe you can see/reach must have a bonding tag on it and some 10mm single connected ) I like it when people try and bond fiberglass baths

Do not do this its no longer allowed/ and was never best practice if your just going to join it and then burry it in the wall whatever you use has to now be a maintance free connector which rules out chock block and the old screw fix junction boxes , grab a wago box and 3 40amp wagos joint them pop them in the box and stick it in the hole they are maintance free and that's allowed by the regs, Wagos are cheap on amazon or ebay if your realy stuck drop me a pm those 99p junction boxes are only rated to 24 amps so they are no use on a ring main , but fine in a lighting circuit

did you ever get to the bottom of this?

in all honesty we use Amazon for loads of stuff now , its usually cheaper than most of the "education" suppliers and free postage and turns up the next day

set Dosbox a pm will see if there are any left

im sad because my Blue Edugeek Lanyard finally gave up the ghost and snapped today

don't do it we asked a few years ago and were told by the bbc that its copy protected and you cannot use the image on anything even if it is to publicise children in need ,

@kennysarmy no its not the same phone check the specs the amazon one is actually a newer processor

don't confuse the nokia 7 with the 7.1 totally different phones same as the 8 and 8.1 im in the same boat looking for my next phone but not sure what to get

watching this thread cheers

whatever you choose please set them up so they don't dazzle oncoming traffic , https://www.bikeradar.com/road/gear/article/bike-light-laws-in-the-uk-what-you-need-to-know-48568/ edited as I made a mistake

is it the same file each time? can you get them to try a different file?

https://discoverwater.co.uk/leaking-pipes

have a look at the opinal knifes they make some very nice knifes not expensive but useful single bladed knife. I still have mine from when I was in the scouts 30 + years ago , one thing I would always say is a small fixed blade knife is way safer than and size folding knife

If you have to stop in an emergency i know which id rarther drop on me "hint Not hot /scalding coffee" (No i dont hold a phone in the car and if needed use a propper handsfree kit)

No not another person whos had too much to drink in the pub but ... when did it become the norm to drink hot coffee whilst driving the car ? I fail to understand how this can be safe at best and could be down right deadly at worst, yet every day i see scores of people with there mug in hand driving along Cheers

sims activities is good for this and a few bits more as well

you coupd always stick some bloody big power caps between the supply and your connections , we use to do that to cars that had under powered alternators in them to smooth things out , id still be inclined to just call it a day and buy a propper 230v amp

is it black mold, if it is its very likley condensation usually solved by a bit of extra ventalation and not drying stuff on the radiators maybe a window vent? opening the windows on a morning etc... the problem is usualy that we spend so much time trying to stop heat excaping and bock drafts that the moist air inside the house has no where to go to it finds the coldest surface it can and condensates on that - - - Updated - - - a bit of bleach in a spray bottle will kill it off but it needs to dry out fully as well

https://www.screwfix.com/p/thomas-dudley-ltd-dw660-h-water-hammer-arrestor-bsp-connection/9813r somthing like this might help

106 rallye was an awsome car well worth a look at

you in a tent or somthing?

last car i bothered to mod was a late 1970's mini stuck an mg metro turbo engine in it was great fun if not a tad scary at times

the mirror will be glass but grinding metal makes for really hot sparkes ill see if i can get a photo of my kitchen window to show you the sparks melt into the glass . it needs replacing (but not untill we redo the kitchen)