Jump to content

Educare_AV

Members
 View Profile  See their activity

  • Posts

    171

  • Joined

  • Last visited

Reputation

75 Excellent

4 Followers

About Educare_AV

Personal Information

  • Occupation
    AV Engineer
  • Location
    St Helens, Merseyside

Employer (optional)

  • Company Represented
    Educare AV Services Ltd
  1. Educare_AV
    Hi Martin, thanks for the feedback and apologies for the delayin responding as I have only just seen this.
  2. Educare_AV
    Iv'e had this in the past and the issue has been the resolution from the PC has been set too high. The optimum res for an X11 is 1024 x 768
  3. Educare_AV
    I would look at the Smartboard 885 16:10 ratio interactive whiteboard with an Epson EB575w UST projector and smart speakers. Personally for the money I don't think there is a better solution.
  4. Educare_AV
    Try wrapping the screws in electricians tape, its worked a treat at a couple of our schools.
  5. Educare_AV
    The VGA output could of failed on the laptop usually caused by a build up of static from continually plugging in and unplugging the VGA cable.
  6. Educare_AV
    I've had this when the screws in the bottom have either been too tight or in some old prefab buildings the plasterboard has been steel lined. Is this case the bottom screws need to be insulated with some electricians tape or the controller board has failed.
  7. Educare_AV
    Can't you just simply just unplug the power cable to the internal PC?
  8. Educare_AV
    Hi, An epson EBX-20 should do the trick, lens 1.58 - 1.72 you may just need to change the power lead to a kettle style IEC. Priced at £299 from most resellers Just double check it will actually fit inside your cage. They also have a feature called quick corners which should make your life easy when it comes to lining it up.
  9. Educare_AV
    If you look in the manual to the projector, you can change the frequency of the remote control. its only a case of holding down a couple of the buttons on the remote.
  10. Educare_AV
    What model IWB do you have? Out of interest if you unplug the USB from the board, will the remote function correctly?
  11. Educare_AV
    Is it an hitachi by any chance?
  12. Educare_AV
    Not really depending on the length required. 10m ones are less then £20. There available upto 40m
  13. Educare_AV
    The issue is the Cat5 USB extenders only support upto USB 1.0, you need to use active USB extensions that are USB 2.0 due to the higher transmission rate required by the projector.
  14. Educare_AV
    They do start to become a little pricey at that size. If it had been 3m wide replacement screens start from around £300ish.
  15. Educare_AV
    What size screen is it?
×
×
  • Create New...