Jackd Posted September 5, 2008 Posted September 5, 2008 (edited) Does anyone have any ideas for anything i could make for my GCSE Electronics project. Im pretty stumped as for what to make cause i dont want to make something simpily stupid like a money box with a flashing light, like everyone else lol. Thanks Jack Edited September 5, 2008 by Jackd
Sirbendy Posted September 5, 2008 Posted September 5, 2008 I remember that..heh. I did a battery powered proximity alarm with an IR diode..fairly sure it ran as well! My all time fave lessons..the smell of burning silicon never gets dull.
Domino Posted September 5, 2008 Posted September 5, 2008 I made a variable tempo/variable time sig metronome.
powdarrmonkey Posted September 5, 2008 Posted September 5, 2008 I think mine was a chess clock, and because I was sad, an extra-curricular stage cue-light system over CAT5e.
mac_shinobi Posted September 5, 2008 Posted September 5, 2008 I remember making an AM / FM radio that had an amp circuit to amplify it. Worked a treat until I tried to combine the circuits into one as originally had the circuit in about 2 or 3 parts / boards / circuits. One bit was the radio circuit with the relevant IC's etc, one bit was the amp and another bit was a step down circuit to step down the voltage etc from a 9v battery to the correct voltage / current. Still got photos of it
Jona Posted September 5, 2008 Posted September 5, 2008 There are some interesting things you can do with PICs (PICAXE) I built a maths education toy for my GCSE using a picaxe chip. Jona
Sirbendy Posted September 6, 2008 Posted September 6, 2008 Ah, PICAXE. Yes, we use it in DT now. I was pre that..heh. Quite a bit pre that, too.
googlemad Posted September 6, 2008 Posted September 6, 2008 I made a personal attack alarm which in the end turned into something so huge it could have been a house alarm! Still got a C or something though
tech_guy Posted September 6, 2008 Posted September 6, 2008 (edited) Your own personal wifi network detector? A friend of mine suggested it to his lad on the course and with a bit of work he made one and it was about the size of an ipod nano. Edited September 7, 2008 by tech_guy
My220x Posted September 7, 2008 Posted September 7, 2008 Ha, I am making a money box, my first idea was an electronic safe but it didnt work out.
SYNACK Posted September 7, 2008 Posted September 7, 2008 How good is your programming? You could make an environmental monitering sensor for use in server rooms, Just a temperature sensor hooked up to a microcontroller that outputs the current temperature via a serial port. Might be a bit lame but from some of the posts around the forum you could probably sell a couple.
witch Posted September 7, 2008 Posted September 7, 2008 There are loads of ideas on this site: Electronic Projects, GCSE Electronic Projects, A-Level projects, Electronic Kits, Teaching resources
bizzel Posted September 7, 2008 Posted September 7, 2008 I made a wall thermostat with adjustable temperature range. Good times!
Andrew_C Posted September 7, 2008 Posted September 7, 2008 Does your school do theatre stuff? I keep hearing of places who want/need a cue light system. PM me if you're interested, and I'll give you some pointers.
dhicks Posted September 8, 2008 Posted September 8, 2008 Does anyone have any ideas for anything i could make for my GCSE Electronics project. An auto-on water pump to pump water from a small, enclosed space (say, just as an example, the courtyard in the middle of our prep school) when the water level reaches a given height (say, somewhere below window level...). Given prevailing weather conditions, could be a best seller. -- David Hicks
iatkinson Posted September 8, 2008 Posted September 8, 2008 Produced an electronic target system back in the days before replica BB guns were frowned upon...and my eyesight deteriorated to the point of not being able to hit a barn door.
pete Posted September 8, 2008 Posted September 8, 2008 One of our lot is building a robot lawnmower. Imagine a vacuum-formed roomba with an underside comprised mostly of spinning stanley-knife blades with motors, steering and blade speed controlled by a basic stamp. We'll be wearing steel toecaps if we have to venture down to the tech dept this year.
originofsymmetry Posted September 8, 2008 Posted September 8, 2008 I made a weight sensitive barrier - like those you see in mutli storey car parks, made it 2 years ago, never worked - got a D lol
I_LuV_ManUTd Posted October 20, 2009 Posted October 20, 2009 Hey, I am making a Chess Clock and am stumped, can anyone help me?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now