Guest ZFarnworth Posted December 22, 2021 Posted December 22, 2021 Hi all, Didn’t know where to put this but I’ll be making a few changes in my local network but curios to know if everyone else is upgrading anything?
AJWhite1970 Posted December 22, 2021 Posted December 22, 2021 Did the SIMS updates on Friday afternoon after the school closed at 1pm, have put December 2021 CU on all workstations and servers and given all servers a reboot. Put more ram in a couple of HP blades. DNM is installing some new cctv cameras. And the final job was a full backup and then turn off all backup servers until Jan, decided to leave them all powered off at the plug and cold should anything bad happen during the shutdown.
3s-gtech Posted December 22, 2021 Posted December 22, 2021 I'll be upgrading my GAF to the enhanced DNGAF version, which includes extra sleep. Barring anything breaking, off until the 4th 1
Davit2005 Posted December 22, 2021 Posted December 22, 2021 (edited) Jus migrated 2500 APs to a new managed cluster with 2 new mobility controllers and one of the existing controllers updated. Was a very long weekend. Edited December 22, 2021 by Davit2005
DalekSec Posted December 22, 2021 Posted December 22, 2021 Moved server updates from SCCM to WufB Moved Papercut server from 2012 R2 to 2019 Moving from Task Sequence to Autopilot Decommissioning SCCM Moving various bits to Azure, just setup Bastion Those are the main bits!
chris11256 Posted December 22, 2021 Posted December 22, 2021 (edited) Mainly approving this months updates for servers & computers, plus some firmware updates on access points & switch stacks. Finally upgrading the remote desktop gateway from 2012 R2 to 2019. Edited December 22, 2021 by chris11256
FragglePete Posted December 23, 2021 Posted December 23, 2021 Just updated all the hosts and the VM's held within. All completely up to date. UniFi bits and bobs all updated as needed. I'll do the SIMS update in the New Year, knowing my luck it'll throw a wobbly just as no one is available to help if it does. I'll sacrifice a chicken, light a few incense sticks and bang a few gongs in the server room to the IT Gods and hope nothing goes a miss while we're away. Pete
AJWhite1970 Posted December 23, 2021 Posted December 23, 2021 “I'll sacrifice a chicken, light a few incense sticks and bang a few gongs in the server room to the IT Gods and hope nothing goes a miss while we're away.” 2
hardtailstar Posted December 23, 2021 Posted December 23, 2021 Upgrading my home office hopefully....
localzuk Posted December 23, 2021 Posted December 23, 2021 Not a lot for me. Migrated SIP providers, and merged a couple of PBXs to move them to a single central system for our Trust.
Guest ZFarnworth Posted December 24, 2021 Posted December 24, 2021 Currently installing Server 2016 updates on my main file server and then primary DC and that’ll be 1 job of the list. Next is office 365 stuff that needs sorting.
mullet_man Posted December 24, 2021 Posted December 24, 2021 Upgraded SIMS, PaperCut, Unifi. Applied latest CU updates to servers. Upgraded SCCM. Thinks that's everything.
kingoranks Posted December 24, 2021 Posted December 24, 2021 Update a few servers, complete implementation of 2FA, test backup, Work on Ruckus APs, tidy my desktop and create folder for 2022 etc
3s-gtech Posted December 25, 2021 Posted December 25, 2021 (edited) Have upgraded my home setup actually - my miserable ancient Plusnet router/modem with its intermittent wifi has been supplanted by a Tenda AX1800 router which will basically be an AP. Happy enough with the wired connections so no change needed there. Edited December 25, 2021 by 3s-gtech
Guest ZFarnworth Posted December 25, 2021 Posted December 25, 2021 Installed all updates last night and today, still had 3 remaining on 2016 [emoji848]
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now