snagrat

Also if the physical machine had the HyperV role installed (even if not used) do not install the Integration Services until you remove that role. Else it won't boot. Also it'll detect a new LAN adaptor so you will need to manually set the IP again

I thought that this would work if you have a E5 license as it includes the PSTN Conferencing license. Microsoft can be the provider, so I didn't think you needed a Partner?

Yes we have seen improved SSO with the client but didn't know if there were other fixes

Yes it does

iamcloud have just released a new version of their CDM. Never get a change log from them though so not sure if this is in the new version or not

I would go virtual

Not advised but I do it lots. I use the net Dom computer name command to do this

File Server Migration Toolkit is your friend. Can be run on a DC without issue. Will copy data, recreate share name and copy the permissions.

We deploy apps through the store and so LTSB ain't fit for purpose for us

Well possible not, but I was hoping that because this was a SWGfL router that they had set it. Maybe I need to speak to them.

Yes we have, but we use IAMCLOUD to do the drive Mappings.

So all working except I cannot ping router from a different network. I can ping other devices but just not the router and therefore cannot get on the Internet. My router is on 10.55.211.254/23 and my two VLANs are 10.55.210.0/24 and 10.55.211.0/24 If on 10.55.211.0 network all is OK, but when on 10.55.210.0 I cannot connect. Any idea?

I'm interested how you get on with functionality and pricing for the hosted ADDS and a DC in each school.

I'm so thick! It was the firewall, I swear I turned them both not but apparently not. Pinging across VLAN now working. Thanks

The device I'm pinging from is connected as a Access port on VLAN 100. The uplinks are TRUNKS on both switches. I can get the CLI export on Monday

The devices go through another switch, Layer 2. Both have the VLANs on and the Trunk ports set. Is there anything else I need to do on the other switch that may be stopping this?

Yes it can

Yes it plugged into port 1 on the switch. Untagged vlan101

Firewall is turned off. Gateway on 192.168.10.1 device should be 192.168.10.254 yes?

Just setting up VLAN on my Dlink DGS-3620 switch. Currently have a few VLAN setup which are working but can't get the routing working correctly. I am currently able to ping all the interface of the VLAN but unable to ping a device. Here is my config, can anyone see what might be wrong? DGS-3620-28TC:admin#show ipif Command: show ipif IP Interface : Net2 VLAN Name : Cameras Interface Admin State : Enabled IPv4 Address : 10.133.155.62/26 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 IP Interface : test1 VLAN Name : VLAN101 Interface Admin State : Enabled IPv4 Address : 192.168.10.254/24 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 IP Interface : System VLAN Name : default Interface Admin State : Enabled IPv4 Address : 10.130.240.120/22 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 DHCP Option12 State : Disabled DHCP Option12 Host Name : IP Interface : VID500 VLAN Name : CafeWifi Interface Admin State : Enabled IPv4 Address : 10.133.154.254/24 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 IP Interface : cafewifi VLAN Name : VLAN0100 Interface Admin State : Enabled IPv4 Address : 10.55.211.253/23 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 IP Interface : mgmt_ipif Status : Enabled IP Address : 192.168.0.1 Subnet Mask : 255.255.255.0 Gateway : 0.0.0.0 Link Status : Link Down Total Entries: 6 DGS-3620-28TC:admin#show ipif Command: show ipif IP Interface : Net2 VLAN Name : Cameras Interface Admin State : Enabled IPv4 Address : 10.133.155.62/26 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 IP Interface : test1 VLAN Name : VLAN101 Interface Admin State : Enabled IPv4 Address : 192.168.10.254/24 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 IP Interface : System VLAN Name : default Interface Admin State : Enabled IPv4 Address : 10.130.240.120/22 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 DHCP Option12 State : Disabled DHCP Option12 Host Name : IP Interface : VID500 VLAN Name : CafeWifi Interface Admin State : Enabled IPv4 Address : 10.133.154.254/24 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 IP Interface : cafewifi VLAN Name : VLAN0100 Interface Admin State : Enabled IPv4 Address : 10.55.211.253/23 (Manual) Primary Proxy ARP : Disabled (Local : Disabled) IP Directed Broadcast : Disabled IPv4 State : Enabled IPv6 SLAAC state : Disabled (Default Router: Disabled) DHCPv6 Client State : Disabled (Rapid commit : Disabled) DHCPv6 Client PD State : Disabled (Rapid commit : Disabled) IPv6 State : Enabled IP MTU : 1500 IP Interface : mgmt_ipif Status : Enabled IP Address : 192.168.0.1 Subnet Mask : 255.255.255.0 Gateway : 0.0.0.0 Link Status : Link Down Total Entries: 6 DGS-3620-28TC:admin#clear Command: clear DGS-3620-28TC:admin#show iproute Command: show iproute Routing Table IP Address/Netmask Gateway Interface Cost Protocol ------------------ --------------- ------------ -------- -------- 0.0.0.0/0 10.130.243.254 System 1 Default 10.55.210.0/23 0.0.0.0 cafewifi 1 Local 10.130.240.0/22 0.0.0.0 System 1 Local 10.133.154.0/24 0.0.0.0 VID500 1 Local 10.133.155.0/26 0.0.0.0 Net2 1 Local 192.168.10.0/24 0.0.0.0 test1 1 Local Total Entries: 6 Basically I have a device on 10.55.210.1 and can ping 192.168.10.254 but cannot ping 192.168.10.1 TIA

Its PS actually, but I call it with a batch file at logon #!PowerShell. De pilo pendet. function MakeACE() { # S-1-15-2-1 is WELL_KNOWN_SID_TYPE::WinBuiltinAnyPackageSid, "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES". # The self-documenting NTAccount type results in an object that "cannot be translated". $id = New-Object System.Security.Principal.SecurityIdentifier("S-1-15-2-1") New-Object System.Security.AccessControl.RegistryAccessRule($id, [system.Security.AccessControl.RegistryRights]::FullControl, [system.Security.AccessControl.InheritanceFlags]::ContainerInherit, [system.Security.AccessControl.PropagationFlags]::None, [system.Security.AccessControl.AccessControlType]::Allow) } function GrantRequiredAccess($key) { $acl = Get-Acl $key $acl.AddAccessRule((MakeACE)) Set-Acl $key $acl } # All Windows 10, since Microsoft apparently managed to break build 10240 as well in December 2015, after having shipped 10586 broken from the start. if ([Environment]::OSVersion.Version.Major -eq 10) { GrantRequiredAccess "HKCU:\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppContainer\Storage\microsoft.microsoftedge_8wekyb3d8bbwe" GrantRequiredAccess "HKCU:\SOFTWARE\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppContainer\Storage\microsoft.windows.cortana_cw5n1h2txyewy" }

Yes but UE-V only syncs settings so each time a student roams Outlook will download everything again. With RP the data is already present and just downloads any new emails

Yeh I have some of the brackets used to attached them to ceiling grids. Is that what you need?

That's the one, but also to apply it to Cortana as well. I have a batch file which I run on login

We use Outlook a lot, all Pupils use it and therefore currently use Roaming Profiles. Does anyone know a way of having the Outlook data roam without using Roaming Profiles?