mac_shinobi

I could have done with a good laugh so bit of a shame there was no video lol

Anyone manage to get a video recording of that !! ???

@Zoatibix - as per @cpjitservices comment - care to elaborate what you did to fix the issue ?

Will try this tonight - Thanks everyone !! LOL @ Cheated out of 2 mhz

Download link for HWiNFO ?

Cpuz part one shows 933.2 mhz so whys the other tab showing 932 ??

ok see attached screen grabs @Sunnyknight

Will open Aida64 , CPU Z and Speccy and try and do one large screen grab and attach it this evening Thanks @Sunnyknight

Paid a lotta money for fast RAM and then for windows utils etc to show that it is PC3-10700 instead of the advertised PC3-14900 or similar.

ok that's fine - bit depressed as was hoping to see it show up as PC3-14900 or there abouts. Almost feels like I have been sold slower ram lol ok will leave it as is then.

Am sure the memory I have is meant to be PC3-14900 and not PC3-10700 so DRAM Frequency is correct although why is it showing up as max bandwidth at PC3-10700

@Arthur / @Sunnyknight and others have been helping with my PC. I have purchased this RAM Kit from MoreComputers . com however so you can see the item, I am posting the scan link : Corsair Memory Vengeance Pro Series Silver 32GB DDR3 1866 MHz XMP Quad/Dual Channel Desktop - CMY32GX3M4A1866C9 - Scan.co.uk On Speccy and other utils it shows max bandwidth as PC3-10700, the DRAM Frequency which is updated in real time in speccy and other utils and without Hyper V installed shows as 933.2mhz ( give or take a bit ) I'm not understanding why the max bandwidth is showing as PC3-10700 - have I been sold the wrong ram kit ? Updated the BIOS to the latest revision which I believe is 2205, taken all the memory modules out except for one memory module and still the same. Put all the memory modules back and reset BIOS / UEFI to factory defaults and then only enabled XMP and ensured that DRAM Frequency was set to 1866 Mhz Motherboard I have is the Asus Z97 Sabertooth Mark 1 I was expecting Max Bandwidth to show PC3-14900 and not PC3-10700 like it currently does. If I have missed anything then Arthur should be able to elaborate and or explain this better. If you require any photos of anything then can do that or video clips on youtube etc

I do if I use that instead of my S36 lol - Think I need to re mount my CPU Block on the S36 which is fiddly as (*&(*^(*&

They have released the H110i - linky http://www.corsair.com/en-gb/hydro-series-h110i-gt-280mm-extreme-performance-liquid-cpu-cooler I've got the Kelvin S36 by Fractal Design Think the H110i GT is better , sigh

Ive got a corsair 750D which has the mount for the PSU at the bottom and seems a nice case , maybe nzxt or bit fenix ??

Wondering if you have managed to resolve this ?

I meant how to alter the switch ports duplex mode and or fix it to say 100 mbps full duplex ?

@Arthur / @SYNACK / @ZeroHour or anyone know how to do that Also what make and model of switch is it that the printer is using / connecting to ?

Anyway on the switch port to set the duplex mode / speed on the switch port to either 100 mbps full duplex Or 10 mbps full duplex Think the data rate is too fast for the printer ??

Someone random has just taken receipt of an email demanding socks lol

Dos_Box_in_his_Sox

@VeryPC - At least a few pairs please !!

What's happened ? You swapped hire cars etc ?

At least a few pairs of these socks please !!!

No Problem - Curious who you end up using to repair the iPad(s) in question