maxrebo Posted October 6, 2023 Posted October 6, 2023 Hi, Just looking in to purchasing some transceivers we need for a project, what's everyone's views on using compatibles over original Aruba transceivers? Thanks
DalekSec Posted October 6, 2023 Posted October 6, 2023 Used compatibles most of the time, no issues 2
fiza Posted October 6, 2023 Posted October 6, 2023 I've used https://www.fs.com/uk transceivers for years. Only every had one issue and they sent a replacement transceiver out quickly. 1
synaesthesia Posted October 6, 2023 Posted October 6, 2023 Ditto with fs.com. Under £30 compared to over £300 in most cases, no brainer. Full warranty too, and you could even keep plenty of spares and still be quids in.
Davit2005 Posted October 6, 2023 Posted October 6, 2023 Same here, used ipolex for home 10Gb Aruba switches, no problems.
pete Posted October 6, 2023 Posted October 6, 2023 Compatibles, usually from FS. We keep a 10Gb and 1Gb original around for those "see, it's the same problem with a branded transciever" moments when support insists on ticking a box on their script.
ITGURU Posted October 7, 2023 Posted October 7, 2023 Always genuine. Had high failure rates on +ADDON networks modules on inherited networks.
DrCheese Posted October 7, 2023 Posted October 7, 2023 Have always used compatible, no issues. As others have said, keep a legit one around to avoid the blame game if you ever have any issues. 1
Mr.Ben Posted October 7, 2023 Posted October 7, 2023 I have to pipe in here :-). One of the reasons we moved to Unifi was that official transceivers only cost £12 each for 1G!
Norphy Posted October 7, 2023 Posted October 7, 2023 I swore off compatible transceivers after a firmware update on the switch knocked out half our network because the switch detected the transceivers were third party after the update. It’s a crappy tactic from HPE/Aruba, I won’t deny it, but after that I always used genuines for peace of mind 1
mikkydoos Posted October 9, 2023 Posted October 9, 2023 Compatibles here.... as long as you get the correct manufacturer specific coded transceiver you're OK. GBICs.com are reasonably priced... you might also want to look at Direct Access cables if you're patching in fairly close proximity.
chazzy2501 Posted October 9, 2023 Posted October 9, 2023 I used compatibles, that were "altered" to work with my HP switches. Worked for 7 years no issues. (1/10th the cost)
StephenPink Posted October 9, 2023 Posted October 9, 2023 ALWAYS FS.com. For the cost saving, can have 10 spares. And 1 genuine on standby if needed for support
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now