Jump to content

Recommended Posts

Posted

Hi

 

I have been asked to look into sourcing a screen and projector in Hall. Anybody have any recommendations of which projector to use, short throw or ceiling mounted. I attach some pics of hall for ideas.

 

Thanks[ATTACH=CONFIG]17305[/ATIMG_1023.jpegTACH]

IMG_3057.jpeg

Posted

personally i would go with a pole mounted and an automatic roll down screen. thing to remember when putting something up high is maintenance.... how often do you need to change the bulb / lens / filters etc. We have a huge sanyo thing in our hall and its a pain as it generally goes wrong several times in a short time space and requires the scaffolding tower to be put up every time it goes wrong which just takes ages to organise and put up.

 

All depends on cost and what size screen you want?

 

A Casio XJM255 could give you 100" at 5m throw length at 3000 lumens

Posted

What else goes on in your hall?

 

A roll down screen or a white wall is better than a smartboard, and as it looks like a suspended ceiling, how much higher does it go.

 

A long pole will wobble more.

Posted

All depends on what size display you want. You are a little bit limited when using a short throw projector. You cold hang a projector on the lighting bar and run the cables up to the false ceiling and then back to a location where you want the computer to sit, or to multiple locations. There is a couple of things you can do. But all really depends on what the budget is.

 

You could contact http://www.stage-electrics.co.uk and speak to them to see what sort of idea they have. I have used them a lot and they are very good and willing to help you get to where you want to get to.

Posted (edited)

Hi, Do you know the exact distance to the lighting rig and also what your budget is?

 

Distance looks approx 5.7m based on the ceiling tiles.

 

From the looks of it you could get away with a 3m wide (4:3) screen and a Casio XJ-H1700 (4000 Lumens) by mounting it directly to the lighting rig.

 

http://www.projectorcentral.com/Casio-XJ-H1700-projection-calculator-pro.htm

Edited by Educare_AV
Posted

Hi All

 

Thanks for the feedback. I have an update and is follows so hopefully someone will help with choice or recommendation of projector.

 

1. The distance between the lighting rig and the wall where screen will be is approx 20ft

2. It can be mounted to the lighting pole as it has electrics already up there

3. The distance for the width of the screen can be a max of 10ft wide with a possible 8ft drop.

4. We would require an electric screen, projector and cabling to a faceplate that would include VGA/HDMI/AUDIO run to the corner of trunking as seen in picture above.

 

Based on this could anyone recommend ideal equipment and someone who can install this and a rough guide on cost as I believe a tower would be required as no loft hatch access.

 

Thanks

Posted
Hi we have a Benq Eco true lazar short throw projector in our middle school, it does our stage in out main hall, we could take a picture of it if you like. It is bulbless too so the maintenance is much lower. It was fitted by Millenium Business Systems from Stoke on Trent so i suppose they could probably get you sorted out. Our staff are amazed with the results of this projector. Its like a cinema screen.
Posted
Hi we have a Benq Eco true lazar short throw projector in our middle school, it does our stage in out main hall, we could take a picture of it if you like. It is bulbless too so the maintenance is much lower. It was fitted by Millenium Business Systems from Stoke on Trent so i suppose they could probably get you sorted out. Our staff are amazed with the results of this projector. Its like a cinema screen.

 

@Ahenderson would you be able to take a couple pics of the projector and the image it projects?

Posted
I've used Optoma widescreen DLP projectors in our school hall for the last six years. They're relatively cheap, bright, don't have filters, and produce a decent image. Lamps are not expensive. Last one of these was around £500 - I tend to replace them every three years for the latest model and switch the existing one to replace another somewhere else.
Posted
personally i would go with a pole mounted and an automatic roll down screen.

I agree totally with that recommendation. Ensure that you get decent installers as the cable quality and termination is key to quality display.

Posted
Hi All

 

2. It can be mounted to the lighting pole as it has electrics already up there

 

 

The lighting bar will have power, but connected to a dimmer somewhere in all likelihood - do you have a dedicated always-on power supply up there?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...