Jump to content

Recommended Posts

Posted

I am getting a complete new Central Heating System installed. The old Copper Pipes are getting ripped out and someone said I could get some cash for them. Anyone know if this is true. Also have the old Indirect hot water cylinder.

Are they worth hanging onto and taking to a Scrap Merchant?

 

I guess old radiators arent worth anything?

Posted

You'll probably find that the person installing it will take it as granted that he will take away all the old stuff and weigh it in.

 

The cylinders will be worth some but will probably also be full of scale.

 

Ben

Posted
You'll probably find that the person installing it will take it as granted that he will take away all the old stuff and weigh it in.

 

The cylinders will be worth some but will probably also be full of scale.

 

Ben

 

And as such it may be part of their factored "quote" , but unless that's on their quote it's yours to get the value from.

 

Rob

Posted
You'll probably find that the person installing it will take it as granted that he will take away all the old stuff and weigh it in.

 

The cylinders will be worth some but will probably also be full of scale.

 

Ben

 

No he is leaving everything for me as that is what we agreed.

 

Not sure how much a house worth of copper will weigh but hopefully I should get a few quid?

 

Should I hang on to the Radiators too?

Posted

Find out if they are steel/cast or copper first. Then take them allong. If they are ferous you won't get anythign significant but it's the easiest place to get shot.

 

If the water tank is pre-insulated on the outside then they may not bother to weigh it and just use a guide price.

 

 

If there is more than one Scrap merchant in the vacinity then it may be worth getting a price off both. Depends on how much fuel you burn runnign arround.

 

Rob

  • Thanks 1
Posted
No he is leaving everything for me as that is what we agreed.

 

Not sure how much a house worth of copper will weigh but hopefully I should get a few quid?

 

Should I hang on to the Radiators too?

 

 

I got about £95 from my old copper tank alone. Bloke who stopped the leak tried to take away, very kind of him. Wasnt part of the deal, unless he was paying me.

 

If you're going down the scrappy, always worth taking the rads down too.

 

I'm in the wrong job.

  • Thanks 1
Posted
the scrappys around here pay approx £900-£1100/tonne for copper and about £50-70 a tonne for scrap steel/iron, but for radiators they will often give more than the weight in steel indicates as they often have brass fittings which are worth more.
Posted

I recently had all new central heating.

 

To get the best price, separate the copper from the brass as the brass is more valuable. Remove the lagging from the tank just leaving bare copper.

 

It's worth phoning around as scrap prices vary from place to place, but i got £175 for my tank, brass connectors and copper micro bore piping.

 

The best prices are usually just the non ferous metals places so they won't take your rads. Steel is only about £200 a ton.

Posted
Actually you'd be surprised - radiators are pretty hefty taken in with all the pipe work and cylinder you'll be in for a few quid - especially if you have some of the really old big rads.

 

They look like normal radiators to me. Some doubles and a couple of singles.

Posted
Still they will be worth a few quid although if they are in good nick get them on ebay, the retail price for rads is unbelievably ridiculous! People always needs rads either for replacements or to add extras.
Posted
Definitely take it to the scrappies - we did exactly the same and got £130 back for some piping and fittings (the rads were new so we just did the pipework, not the whole lot and we didn't have a boiler).
Posted
Our electricians said they usually get about £1,40 per kilo for old Cat5e!

So piping is worth considerably more

 

Always keep all my cable off-cuts and old cable rip-outs, had the scrap man round during the week for table frames and chair bases at work and he will give us a decent price for the scrap cabling, going to let me know what it will be when he comes for the next stack of old tables.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...