kennysarmy Posted October 21, 2011 Posted October 21, 2011 The admin logs state: The caching service exited since authentication responses were not being received quickly enough from the AD and a backlog has been noted several times. The caching service exited unexpectedly. This is likely to result from external issues reported over the preceding 10mins which include 76 authentication exchanges which have suffered from network congestion However I have pushed out via GPO to our site our old schoolname.proxy.county.sch.uk so the smartcache is currently under very light load.... RM belive we are overloading the smartcache OR that there is a network issue between the smartcache and the DC it's pointing to for NTLM authentication. I wondered two things... 1. Can I see some figures of number of clients everyone is running successfully through their smartcaches - we have 750 clients but suspect the actual number that are on at any one time and simultaneously accessing the internet will be much lower - though I've been told the smartcache does nt log this - so it's a guess but I would say around perhaps.....300 at any one time? 2. Is there anyway to test the speed/performance of the network between the DC and the smartcache other than a very basic PING command? Your hopefully. J
MYK-IT Posted October 21, 2011 Posted October 21, 2011 We just replaced our (7 year+ old) RM SmartCache2 box over summer with SmoothWall UTM-1000 appliances Sorry, back to answering your quesition. 1) We had ~450 devices connected via the RM SmartCache 2 device and to be honest never came across this fault/error. 2) Not sure, only thing i can think of would be to use the FTP/Web hosting part of RM SmartCache2 and upload some big files/movies to it and then attempt to view/download them to client(s) and monitor the speed accordingly? though this technically would not be a reflection on performance of caching internet based content etc. 1
Chris_ Posted October 21, 2011 Posted October 21, 2011 We have the same issue. We've got around 300 computers, but they won't all be in use at once. RM are aware of this issue and apparently the workaround is to install the Smartcache tracker application on all of the computers and disable AD. I believe it's only affecting boxes that are using the AD authentication.
kennysarmy Posted October 21, 2011 Author Posted October 21, 2011 We have the same issue. We've got around 300 computers, but they won't all be in use at once. RM are aware of this issue and apparently the workaround is to install the Smartcache tracker application on all of the computers and disable AD. I believe it's only affecting boxes that are using the AD authentication. Sadly that won't be an option here as we are looking at ways of using a guest wireless system with WPAD.DAT pushout that will allow users with AD credentials to use their own devices for web access.....obviously they won't have access to install the tracker app. on their devices
MYK-IT Posted October 21, 2011 Posted October 21, 2011 Sadly that won't be an option here as we are looking at ways of using a guest wireless system with WPAD.DAT pushout that will allow users with AD credentials to use their own devices for web access.....obviously they won't have access to install the tracker app. on their devices Ah, that will explain why we didn't come across this problem, our box was too old to have the updates applied to it for AD authentication, hence we were using the the RMSmartcache IDENT client. Introducing guest/wireless was also a nightmare with RM SmartCache (it may not be with the AD authentication method you're using) hence why we changed to SmoothWall and haven't looked back!
Tallwood_6 Posted October 21, 2011 Posted October 21, 2011 We are having the same issue here (around 400 devices) box is less than a year old and i'm about to open yet another call with RM.
TechMonkey Posted October 21, 2011 Posted October 21, 2011 We have that issue and the only option open to us was to return the box and have a full reset with no "spare" available to tide us over while without it. RM have never mentioned AD problems to us & we had a call open for about 6 months. There is also a HDD error that hasn't gone away with a replacement. We are looking at moving over to a different system as a matter of urgency as we no longer have confidence in the the SmartCache box or in the support behind it. We also have a suspision that they haven't any Linux/Squid/Proxy people on staff as everything was fairly generic when we did have the call open.
kennysarmy Posted October 21, 2011 Author Posted October 21, 2011 We are having the same issue here (around 400 devices) box is less than a year old and i'm about to open yet another call with RM. We are getting the following in our smartcache logs with only 2 users going through it 2011-10-21 15:27:02 127.0.0.1 Housekeeping External issues were noted by the caching service in the last 10mins which include 36 authentication exchanges which have suffered from network congestion Have again spoken to RM line 1 support and asked if we can be told if there is bug with the smartcache or if it just is no longer up to the job now that schools have grown in PC estate and have more reliance on online resources..... Maybe it's time to look at alternative products....
TechMonkey Posted October 21, 2011 Posted October 21, 2011 Ah, we are getting : The caching service exited unexpectedly. This is likely to result from issues reported over the preceding 10mins which include 1 instance of a backlog of browsing requests or Issues were noted by the caching service in the last 10mins which include 15 instances of a backlog of browsing requests Can't be an overload issue as we haven't hugely increased our client base for ages. Ohhh and my favourite: ISSUE FOUND: A network issue is preventing connections to internet web hosts. Apparently happens when it updates itself & loses internet connection. But they don't tell anyone that until you get far into the support call!
AngryTechnician Posted October 21, 2011 Posted October 21, 2011 I never got AD auth to work reliably on our Smartcache - in particular, it wouldn't respond properly to auth responses from PowerPoint when using trying to embed YouTube videos, even when it worked fine in IE. We switched back to IDENT and everything was OK until 3 weeks ago, when we finally conceded that the filtering is just not up to it any more. Our Smoothwall SWG-700 is going through final acceptance testing this week, then its bye-bye Smartcache. 1
MK-Jester Posted December 14, 2011 Posted December 14, 2011 We also have the same problem where the SmartCache struggles with AD authentications, considers this a problem, decides to restart its processes and consequently breaks the internet connection. RM will only try to diagnose the problem if we set up a SSH link to the SmartCache. Setting this up would be a problem for us. Therefore like other here we will have to consider an alternative. Kennysarmy - what did you decide in the end? Have you switched to a smoothwall solution? Regards John
TechMonkey Posted December 14, 2011 Posted December 14, 2011 We now have a Smoothwall box and our SmartCache box is looking a bit forlorn in the corner. Very happy and now have more options than I can shake a stick at. 1
MYK-IT Posted December 14, 2011 Posted December 14, 2011 We now have a Smoothwall box and our SmartCache box is looking a bit forlorn in the corner. Very happy and now have more options than I can shake a stick at. I can see a pattern occurring here... 1
K.C.Leblanc Posted December 15, 2011 Posted December 15, 2011 We gave up on ours and went back to using the SWGfL proxy on it's own. We'd already had a major issue with it not reporting user's names and applying policies properly. Spent a fortnight being sent diagnostic instructions that didn't work. In the end I had to phone SWGfL support, ask to speak to a supervisor and request the call was transfered to a different agent. The blasted thing still fell over when it got too busy.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now