howartp Posted December 15, 2021 Posted December 15, 2021 Hi We're about to swap Engineering and ICT/H&SC departments (between two buildings) over the next 12 months which gives me a blank slate for 3 brand new IT suites including new PCs. Below is our default benching everywhere else with custom legs (2 per stack, 2 chairs between each stack) but kids are constantly pulling wires out from behind or in front, or the PCs 'fall' off the legs. Has anyone got any nice solutions that work well for them that achieve the balance of tidiness whilst still being at least reasonably accessible to IT Support, under lock & key or otherwise? Peter
robyholmes Posted December 15, 2021 Posted December 15, 2021 We used 900mm worktop on top of custom legs which sat far enough back you wouldn't bang your legs. Trunking on top with the middle row of computers have the trunking down the middle so no cables can fall off the back of the desk etc. They always stay on the worktop. PC wise we have VeryPC Micros attached to the back of monitors which have a cable cover so students can't pull out cables. They can still play with the power adapter and screen cables mind so it's not perfect, but working well for us. 3
Scifigirl Posted December 15, 2021 Posted December 15, 2021 (edited) We have used a site called Reyooz-- not for benching specifically but for some desks and that.. https://www.reyooz.com/ Edited December 15, 2021 by Scifigirl mispelling 1
psydii Posted December 15, 2021 Posted December 15, 2021 Personally I've always thought slate to be a little OTT for benching. 1
andy_b Posted December 15, 2021 Posted December 15, 2021 Personally I've always thought slate to be a little OTT for benching. Every pupil gets their own chalkboard though! 1
Disease Posted December 16, 2021 Posted December 16, 2021 We have ours laid out like this, it works really well.
LeMarchand Posted December 16, 2021 Posted December 16, 2021 PC wise we have VeryPC Micros attached to the back of monitors which have a cable cover so students can't pull out cables. They can still play with the power adapter and screen cables mind so it's not perfect, but working well for us. [ATTACH=CONFIG]63965[/ATTACH] Only one of my sites still has a suite, but it's VPC Flex PCs too. The "cage" is heaven sent, and the only thing that gets fiddled with regularly is the 3.5mm audio into the screen speakers as most of the rest is "locked up". Our suite has never looked that tidy sice we took the "our new suite" pictures, though - did you fix the stands to the top? 2
robyholmes Posted December 16, 2021 Posted December 16, 2021 Only one of my sites still has a suite, but it's VPC Flex PCs too. The "cage" is heaven sent, and the only thing that gets fiddled with regularly is the 3.5mm audio into the screen speakers as most of the rest is "locked up". Our suite has never looked that tidy sice we took the "our new suite" pictures, though - did you fix the stands to the top? To be fair, this was when it was new, ha. Although three years in now and it's still not looking bad at all. No the stands are not fixed down. They do like to move them around a bit but the network cables stop them going to far. Each PC lines up with a double socket so it's easy to put them back in position to pander to my CDO (OCD).
DrBeaker Posted December 16, 2021 Posted December 16, 2021 We have ours laid out like this, it works really well. [ATTACH=CONFIG]63970[/ATTACH] [ATTACH=CONFIG]63971[/ATTACH] [ATTACH=CONFIG]63972[/ATTACH] How do you get power and data to the middle desks?
Guest ZFarnworth Posted December 16, 2021 Posted December 16, 2021 How do you get power and data to the middle desks? My guess is from the floor
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now