Pyroman Posted May 8, 2008 Posted May 8, 2008 Hey there, We've been donated about 30 PC's and so far most of them work however about half a dozen of them refuse to work, when i start them up the fans spin, lights come on but the screen stays blank (no signal to monitor, amber light) and no bleeps are heared. Even if i take out the RAM it doesn't go crackers and bleep it just powers up and sits there, i can strip them down for bits but would be nice to have 6 extra working PC's. They all suffer from the same problem Help?
Joanne Posted May 8, 2008 Posted May 8, 2008 motherboards... I had one go and it showed all those symptoms. Replaced it and now the machine is fine
tech_guy Posted May 8, 2008 Posted May 8, 2008 Have you checked all the gubbins are still inside? Donated pcs - some of the bits in these six might have gone walkies....
Michael Posted May 8, 2008 Posted May 8, 2008 The fact it's not beeping means it's not POSTing (Power on Self Test). I agree what's been said already that it's more than likely the motherboard.
hotwired007 Posted May 8, 2008 Posted May 8, 2008 remove and clean and then reseat everything... more than likely dodgy mobo's otherwise...
FN-GM Posted May 8, 2008 Posted May 8, 2008 I would check the memory, we have a few machines don't bleep when there is a memory problem.
PeterW Posted May 8, 2008 Posted May 8, 2008 As per above posts probably poorly main boards, check the ATX power connector and especially the 2x2 pin ATX 12v connector (if they have them).
FN-GM Posted May 8, 2008 Posted May 8, 2008 Change the BIOS battery. I've seen a few boards not fire up when the battery is flat. Good suggestion
witch Posted May 8, 2008 Posted May 8, 2008 I agree about the battery and the psu - I have had machines with the same symptoms and I thought it couldn't be the psu as the fans etc were on but in the end it was. Worth a try anyway
rhyds Posted May 8, 2008 Posted May 8, 2008 My first port of call is the PSU every time, after that's been proven good I check the mobo
Pyroman Posted May 8, 2008 Author Posted May 8, 2008 Haha make that 7 machines, the one i've been using to image the rest has just fallen on it's arse and now refuses to start =D oh happy days!
tri_94 Posted May 9, 2008 Posted May 9, 2008 Hi there, a few things to check. 1st Memory. 2nd Connection to Motherboard. 3rd CPU and heat sink on correct. 4th BIOS battery. 5th try disconnecting any Firewire or Usb ports that have plug in headers. cheers nick
flashsnaps Posted May 9, 2008 Posted May 9, 2008 No beeps doesn't always mean alot - we had a few old machines giving to us, which had the small speaker which makes the beep removed! Try starting it up with the hard drive unplugged. I would then trial and error, unplug everything, add it back one piece at a time.
ricki Posted May 9, 2008 Posted May 9, 2008 I have one on the bench at the moment and it does exactly the same and I know the hard drives gone. When some machines boot up they check the drives and if they get no response they carry on. But if they get a partial response they get stuck. Disconnect the hard drive and see if it will go into the bios. Just an idea. Richard
hotwired007 Posted May 12, 2008 Posted May 12, 2008 Any news on this did you solev any of the problems?
Pyroman Posted May 12, 2008 Author Posted May 12, 2008 They're dead! Being as they were donated PC's and there's some still to come i'm going to put them on the "needs fixing in the future" pile, i think it's the mobo i unplugged *everything* bar the power supply and took out the cmos battery and went from there plugging things in one by one and tried with a known working power supply. In short, they're dead, however during stripping one down i noticed they had no thermal paste on the CPU atall haven't tried it with a known working CPU, might be worth a look
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now