Shadow_Walker

Looking for some PRTG experts out there. I am needing to create graphs to show usage of some of our equipment. I have setup the sensors per device but i have over 20 of the same devices all giving me an average number from the previous week but I need to be able to colate this data quickly, is there a way to pull that into one report just with the average number of each?

This is correct, only thing was he never used a tester for this he was just going on where the cable was run down the wall and then under the floor into the island. There has been no diy in the house for over a year so doubt anything from that, I just found it strange how all of a sudden just happened randomly.

He didn’t say on this but he wanted the cabinets off where the cable down the wall runs as a starting point. This is why I asked here as did not seem right. He is thinking it could be a screw due to how tight the cabinets are to the electrics but the joiner I know was careful over 4 years ago.

Looking for an opinion on issue having at home. Randomly Friday morning most of the electrics in the house went off, checked the fuse board and the RCD had tripped, I couldn’t get it to go back to on so flicked each MCB off and bought the RCD back on and then flicked each MCB on and it was the hob causing it. So fast forward to today and have had an electrician round and after disconnecting the hob and just putting it on the hob isolater the fuse board is still tripping. The issue is I have the hob in the middle of my kitchen island so the cable goes underneath the floor and then up the kitchen wall so it is not ideal. He has said he wants to test the cable which goes down the wall down where the cabinets were installed 4 years ago to see if a screw had gone through it years ago on install and only causing issues now. For this I need to have the cabinets removed at the top of the kitchen and there is no guarantee that that is where the issue is. Anyone got any ideas or thoughts.

Are you using something like Senso or Impero as well, have had similar in the past where they were causing some conflicts with sites so worth checking if you have them and if you can test with a machine with them on and one without.

Would 100% look at EXA

Novus https://www.novus.co.uk/ couldn't fault them.

Anyone using this yet?

Anyone using Windows Defender Application Control over applocker, just doing some digging into it and seeing if it is an alternative to app locker on intune devices. Just looking if anyone is using it and any caveats.

Clutching at straws a bit here but has anyone ever managed to export data from PRTG to Excel/CSV format? I have multiple nodes trying to track and could do with it in that format.

Speak to Novus, helped us massively in our Intune rollout with 30+ schools https://www.novus.co.uk/. Our process sped up massively once they came on board and offered training during and after.

Have they got correct permissions on the old files?

Deepening on who your ISP is they might be able to offer this as a service upstream. If not would look at a smoothwall S1 box.

Is the user activity screen are there any users shown in there?

Just a random one to to check in Network > Firewall > Smoothwall Access is the idex cluster service in there?