Edgehill

Not sure if it's the same for network servers set ups, but for online activation we've had similar issues before due to users not having required access to C:\ProgramData\Avid\Licenses\Sibelius. Might not be the same folder, but does sound like it might be a permissions issue.

I've had a look and "checkAuthorised()" is defined in mrbs_auth.inc. Looking at the mrbs_auth.inc for the current and older versions the function now seems to include different checks on the "level" of the page. My guess would be that this is failing as bulkYearMake.php is not a default part of the install so has no level assigned. It looks like there is a bypass switch built into "mrbs_auth.inc", but I could be mistaken with my limited understanding. As a test you could try switching line 197 temporarily to "function checkAuthorised($page, $just_check=true)". If you can then access bulkYearMake after this you need to edit the mrbs_auth.inc to include a level for bulkYearMake.php. If it still doesn't work then you need to delve into the "checkAuthorised()" function to understand what it is doing and why it might be failing.

The "checkAuthorised()" function is not defined within bulkYearMake.php. I'm limited on my understanding of PHP, but I think this pulls from "defaultincludes.inc" and that then pulls from another file (likely functions.inc?). Is your bulkYearMake.php in the same directory as "defaultincludes.inc"? If not it then this could be the issue, so I would test either moving it to the same directory or amending bulkYearMake.php to account for the different path.

What version of the software are you trying to install? Is it one of the newer classwiz versions or one of the older versions?

Unfortunately I haven't been able to get anywhere with this either. From what I've seen the issue is RM based so I wouldn't expect Capita would be able to provide any guidance on this. Since my last update I tried removing all RM packages from a workstation and this seemed to stop the issue form occurring, but I was unable to pinpoint the issue to a particular package as the issue reoccurred at different times each time I started putting packages back on.

You can see .net framework in regedit, if you navigate to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full" there is a "Version" key.

Strange, the macro theory doesn’t fit what I’ve seen. I’ve joined a raw windows 10 PC to our domain and checked the same GPOs are applying, in this case the report runs fine opening but the template shows “Macros are disabled”. It’s the same for our 2012 R2 RDSH (non CC4) server, template shows “Macros are disabled” but report runs fine. Furthermore I have successfully replicated the issue on Win 8.1 (with office 2016) and Windows 10 with office 2010. I have also found that sometimes after changing various settings the report will run fine for the first attempt but will fail on a second attempt or after closing and reopening SIMS (and rerunning the report). So it sometimes looks like changes have resolved the issue, but on repeat testing the issue persists.

No, unfortunately I'm still having no luck with this. Out of interest are other people who are getting this running RM networks or vanilla windows?

Out of interest what settings did you change to get around this? We have the same issue for all users. I've tried setting the following via GPO with no luck; Enable all macros, Trust access to VBA project object model and adding "%TEMP%" as a trusted location. Any help would be greatly appreciated.

Are you using a proxy server? We used to have Chrome set to use the system proxy, after resetting a profile users would need to open IE to populate the proxy settings in Chrome. If you are using slightly older versions of Chrome (before 70 I believe) you can check proxy settings by navigating to Chrome://net-internals

Are the policy folders on each of your domain controllers the same size? If you run "nslookup [your_domain]" from cmd does it show any unexpected entries? If you check the .ini file, do the necessary users have read permissions to it?

To update, Google Admin fix has now worked for me. Double checked the settings and it wasn't replicating down through OUs, manually setting it on the OUs in question has got rid of the error message.

I left it 3-4 days between changing the setting and testing. But it is possible the change hadn't picked up as I suspect the "real-time presence" is the cause of the issue.

We’ve also had this issue for a while, I did some testing today thought I’d share results in case anyone finds them useful. Issue only seems to affect newer versions of GDFS, 28.1.35.1747 shows issue whereas 27.1.49.1806 does not. I tried the Google admin fix but it did not work for me.

I use EaseUS at home, but I don't know what the license covers.

We have V1.1, I found a trial version of v3.0 and that also works fine with a standard user too. I don't suppose you know where you got the version 4 copy from?

Hello All, Our maths department use an old (circa 2007) Casio FX-ES Emulator. I can’t seem to get it to work without the users being privileged users (Local Admin). There use to be a habit here of making everyone privileged user so I don't think this ever worked without. The software requires a command line argument to tell it which calculator to open however this argument is not used unless the user is a privileged user. (Other software is using arguments correctly for non-privileged users) I’ve tried giving non privileged users access to the Command prompt, Registry & C drive none of which make a difference. I’ve also tried creating my own shortcuts, bat files & VBScripts none of which cause the argument to be used for a non-privileged user (But work fine for privileged). Does anyone successful use this software without giving privileged user status? Does anyone have any ideas as to why the argument is not being used or a potential fix?

This is not correct, not all traffic will go through the root bridge. if traffic is going upstream so to speak it would only go as far as needed and not through the root and back.. But if you leave priorities as the default and a less than ideal switch is elected it would potentially still be inefficient for anything that does need to go through the root bridge. With default STP convergence is 30 to 50 seconds and changing priorities will cause a re-election, so yes this should be done out of hours.

Windows 7, we have a mix of 32bit/64bit but so far I have only seen the problem on 32bit PCs.

I'm also having this issue with "Access to the path" error messages. Most users are still able to launch file stream but for a few I have had to delete the local profile before file stream will launch. We have windows management framework 4.0 installed. Is anyone else having this issue, has anyone been able to resolve this?

If you log on to the desktop in question and open resource monitor then look at Network activity it might show which program is the culprit.

If you open the conversations and/or endpoint windows in Wireshark you can sort by Bytes, which should point to which IP addresses are using the most bandwidth.

I did my CCNA R&S back in April and recently started reading the official cert guide for the CCNA security. I'm only about half of the way through the book, but so far it is a combination of basic security concepts, security at layer 2 and Cisco ASAs. Unfortunately the ASA CLI uses a completely different set of commands to Cisco routers and switches so it is a bit of a learning curve.

I couldn’t get it working with office 365, but we have a SMTP mail relay setup by county on one of our servers. When I used the settings for the mail relay it all worked for me. So it's possible my settings for 365 were just wrong. The creators of MRBS run support for the software from https://sourceforge.net/p/mrbs/support-requests/ They are incredibly helpful so I recommend posting on there if you need any help. If you want to see the fixes suggested by the developers for my problem please see the tread I created https://sourceforge.net/p/mrbs/support-requests/799/?page=0 I believe the office 365 SMTP server is now smtp.office365.com if you aren’t already using this you could try using $smtp_settings['host'] = 'smtp.office365.com'; // SMTP server Also If you change $mail_settings['debug'] = FALSE; to $mail_settings['debug'] = TRUE; You should receive a debug on making a booking which might give you some useful information. Hopefully this helps.

I am trying to set up the SMTP settings for our MRBS system. Unfortunately I’ve not had much luck and am unable to get it working with either office 365 or gmail (I'm guessing my settings are wrong). The rest of the MRBS system is still working fine but no email confirmations are being sent. Any help or advice on finding what this issue is would be greatly appreciated. Below are the settings from “config.inc.php” relating to SMTP/mail can anyone see anything that might be causing an issue or I have missed something? Thank you, Mike $mail_settings['admin_on_bookings'] = TRUE; // the addresses defined by $mail_settings['recipients'] below $mail_settings['area_admin_on_bookings'] = TRUE; // the area administrator $mail_settings['room_admin_on_bookings'] = TRUE; // the room administrator $mail_settings['booker'] = TRUE; // the person making the booking $mail_settings['book_admin_on_approval'] = FALSE; // the booking administrator when booking approval is enabled $mail_settings['on_new'] = TRUE; // when an entry is created $mail_settings['on_change'] = TRUE; // when an entry is changed $mail_settings['on_delete'] = TRUE; // when an entry is deleted $mail_settings['details'] = TRUE; // Set to TRUE if you want full booking details; // otherwise you just get a link to the entry $mail_settings['html'] = TRUE; // Set to true if you want HTML mail $mail_settings['icalendar'] = FALSE; // Set to TRUE to include iCalendar details $mail_settings['admin_lang'] = 'en'; // Default is 'en'. $mail_settings['domain'] = ' '; $mail_settings['username_suffix'] = ''; $mail_settings['admin_backend'] = 'smtp'; $smtp_settings['host'] = 'outlook.office365.com'; // SMTP server $smtp_settings['port'] = 587; // SMTP port number $smtp_settings['auth'] = True; // Whether to use SMTP authentication $smtp_settings['username'] = 'email address entered here'; // Username (if using authentication) $smtp_settings['password'] = 'email password entered here'; // Password (if using authentication) $mail_settings['from'] = 'email address re-entered here'; $mail_settings['recipients'] = ''; $mail_settings['cc'] = ''; $mail_settings['treat_cc_as_to'] = TRUE; $mail_settings['ics_filename'] = "booking"; $mail_settings['debug'] = FALSE; // IMPORTANT NOTE: Do NOT put any configuration apart from the "Entry Types" // below this section require_once "language.inc"; // DO NOT DELETE THIS LINE