nathan3388

that is just for one though aint it

that is fine, they are expensive for what they are though u know any cheap places to get them from .

did you have to go any configuring with them to get them to work

Hi all I am after someones advice (i as i don't know alot about fibre) on whether sfp transceivers are plug and play with the switch above ( dlink dgs-1210-24) or do u have to do some special configuration with them so they work. As i want to be able to send Vlan data of these links to. If you could let me know which ones are the best ones and what will be compatiable to use. Thanks Nathan

Do you have any script or acutally get it working with autoit i have tried and failed

if you do everything yourself to then you can fault find and it is must easier than going to diagrams and cabients you can just do it off the top of your head as well makes life so much easier. We have never had contractors in the 14 years that i have been here. We would even let the local authority ICT team come in cable because they are not very good double up on everything pull wires through places that are unreachable like plaster in the cables, etc

we do all the work our self as you say the school bidget is tight. But if you do everything in house then the money can get pumped back into ICT for the pupils to benifit and learn new skills. We saved absolute thousands by doing this like the best part of 500 grand at least. We basically rewired the whole school. At the end of the day depends if you are happy in doing what you do and the school trust you and know that you are not qaulified.

Morning All Was just wondering if you could help me out i have install the mult e maths resources on a shared application drive. installed the toolbox to all the computers that need it. Now i find out that you need to install the client on the computers to but the client is intergrated into a setup file (which has to be installed manually). Was wondering if anyone has got the client as a msi or .exe so that i can push it across the network. Thanks

go around and check cabling we had a kid plug one network cable in one port then pluged it into another slowed the network right down

Have you checked that you have not got a loop through on the network. this will broadcast packets and sometimes lose connectivity we had this problems as we didn't have spamming tree turned on

super converter it is free and it also supports alot of files to export to very handy

interactive projectors are pants you have to calibrate them all the time, have a mind of their own and cost way too when you can pick a interactive board and projector for cheaper.

try City Electirical factors these are who we deal with

hey guys was just wondering if you can help me, as i am trying to deploy the actiview and driver across our network but need to install it quietly was just wondering want switching commands you use to install it. Thanks nathan

hey all was just wondering if someone can help me trying to deploy the actiview software + driver across our network, but struggling with the command switches that you put on the end. can someone help me and tell me what command switch they got on there's to make it install quietly. Thanks

Hi All Was just wondering if someone can help me i am after the activote software has anyone got a link to download it off or not Thanks Nathan

sometimes it is the network card that is fault we had that on one of our servers but a new card and it was fixed

It may be cheaper to re repatch all the network cables, how many cables go into the cabient i have got to move a cabient with 80 cables in it and fully thread 16 cables this is only about 2-3 days work at the max. May be cheaper for you to move the cabient.

In the our nursery we have a smartboard at a low height and when the teacher writes on it they sit on a chair at the side and write on the board. with the projector and your ceiling are too high maybe look into getting extendable poles and attach the projector mount to that then that is problem solved. The projector will have even pan and tilt to be able to project from a good height does not have to be square on.

Hi we are new to smartboards we just bought a new Smartboard x880 but the software that we are liciensed for does not support the board. Was wondering if there was any site liecensing you can buy or network install or something just need an idea for prices also it is a primary school so will there be discount or anything else thanks Nathan

Hi All Was wondering what visualiser is the best to buy. We are going to be using it within a primary school to enlarge the text so the children can see, but was wondering which are the best to enlarge and give a clear image so the children can read the text off the project. Thanks Nathan

was just wondering if someone could tell me what the best software is to design a blueprint of your network. I have tried visio but was taking to long is there any quicker software to design it.

The Problem is sorted it was the SC9 Control board in the back of the board had a spare one to hand and replaced it. This solved the alignment problem.