cheesypete

Trying to design a report that pulls the attendance marks from students into a spreadsheet .. So as example, filter by date and then in the cell for each student "/ \ / " etc All i can seem to generate is a report that displays the session summary percentages etc In the pre designed reports you can obviously see the marks so feel there must be a way?? Myself and admin lady going mad!

Thanks for advice up to this point Have escalated to those who control the router - will let you know!

Obviously not at school at moment (theres devotion, and then theres stupidity!) @Willott - thanks for your advice up to this point. Changing the gateway to 10.4.192.252 was the "blindingly obvious" variable i couldnt see - made perfect sense considering i had been following the rules of setting vlan devices to the switch ip they were connected to (but for some reason not those on core / vlan1) @Katy - will look at that in morning. Thank you

So, flicking the default gateway to 10.4.192.252 allows pinging from both sides - result... ...however, the endpoints lose connection to internet So somewhere there must be a need to edit the route table?

No i dont have access to the router, so core switch was to be used for routing (being L3) I'll go and have a play now..

Currently using 10.4.192.150...

Hi Michael - thanks for the reply, and apologies for delay in replying Your comment was potentially a eureka moment, as that was one thing i had overlooked - sadly, popping the tag onto the port didn't make any difference - grr! Keep getting pulled back to the route table, but apart from the static route to the gateway (10.4.192.150) the rest of it has been autopopulated with the vlan interfaces (10.11.x.x) - the core switch being 10.4.192.252

I'm at the point where I've got VLAN blindness and cant see the reason for this issue - its probably something really obvious.. Currently moving away from a flat network to one with VLANS - all switches are HP, with the core switch being an HP A5800 and edge switches mainly HP 1910s Have implemented some "test" VLANS across the core and edge switches, and as far as i can tell the intervlan routing is working fine; i can ping devices across vlans, as well as access shared folders. However what i cant seem able to do, is ping devices (in this case servers) that are currently wired into the default VLAN (1) on the core I can ping the core (ie ping the default VLAN) from any device on the VLANs i have created, but i cant ping the devices sat on VLAN 1. However devices that aren't part of a VLAN still can do so (and obviously this is paramount as i don want to collapse the whole network!!) First question is - should i be able to ping the devices on VLAN 1? I feel that i should, but might be missing some basic VLAN 101 knowledge here Secondly - what am i missing in my "wood for the trees" state!! It feels like its a routing issue but cant see why.

Did you migrate using their migration toolkit, or did you manually do it? I seem to think that only by using their toolkit, will the passwords remain intact.

Did you get anywhere with this Chuckster? Literally just come out of a meeting where we raised the question of whether we are still paying for OPENHIVElive now that its O365 based. The latest Capita invoice doesnt give a breakdown of costs so need to chase that, but if (when!) we move away from Openhive it would be great to retain the accounts and have ability administer them

Is there any chance you can pass these settings / exceptions on to me? Am pretty sure we are having the same issue

Is anyone else using the admin console in Testwise and experiencing issues - specifically through Openhive / empSN? Our examinations officer can log on, but then hits "blank screens" so she cant see any results etc. Have added URLS to Netsweeper white list with no luck. Running through a *cough* proxy anonymiser or at home and its fine?

Hopefully Stuart hit the nail on the head but have you actually registered your site with (CCS) Capita to use Solus? This could generate that error.

On the whole it works fine, but without RSAT / Windows 2012 the Metro UI will play silly devils. Having upgraded my machine in the name of testing, i find myself with a completely blank Start screen (no tiles) when logged onto the domain. Log on as a local user and its fine.

We block any 'net access using Impero, and we are also (probably!) using the same reg entry that timbo is using (for Word)

Thanks LocalZUK - think that basically confirms the conclusion i had come to and have now set up our helpdesk to come through Gmail However, has anyone managed to get forwarding to work from an existing account to gmail? I'm trying to avoid getting staff to remember a different helpdesk address by having forwarding set up on the existing account, but it doesnt seem to work? The email hits the original account (with forwarding turned on) but it never arrives at the Gmail address?

Thanks for highlighting that Matt - had skimmed through the very same email, but think I focused on the apology more than anything! Solus...here i come again!

Could be any number of things - change of server IP? Tap Adapter ok? Firewall? Ultimately I suggest you simply get in touch with the Capita Support team - I've had similar problems and they've remotely logged in and sorted without too much hassle

We use CS4 and had a similar issue - as themightymrp suggests / carried out, we too had to go into Photoshop and deselect. I do know a while ago that Adobe released a patch for this (may only be a CS4 specific patch?) - may be worth checking on the Adobe site

There's no easy way - this was done deliberately to prevent malicious code / spam pinning itself to your taskbars Have a read here though - it may help! Pin GPO

I don't think the Updater-B issue causes the console to do anything other than report false positives. I may be wrong. Did this message occur after performing the console "fix"? Have you carried this out at all? Have you checked the services to see if they are running - i've had this message when one of them has stopped

David Glad you got it working - you just need to be aware / remember that you may walk into work tomorrow and find it doesn't work at all due to a patch / update that's been applied. Pete

I think everyone pretty much agrees with your feelings towards T4, and whilst it currently works (although not obviously accessible) future SIMS updates are likely to break it altogether I'd personally give up the ghost now and remember it for what it was!

As Matt40k says, that setting is global, but there are a lot of options (eg setting academic year) that are per user - which i always find baffling!