markwilfan

Internet High 5! Nice spot timbo343

Have you got the "isolate wireless client traffic" on with whitelist?

cool, happy to help matey. ours works fine so can compare config if needed. To answer a previous question we currently don't give detailed instructions for installing certs. Thinking I might need to

lol so say again what doesn't work, you've confuzzled me now

we have 2x ruckus 3050 controllers running 9.9.0.0 build216 and 32 x zf7363 APs

Here you go @timbo343 The hotspot service as you can see takes the user to http://192.168.31.253/byod/index.html as their login page which has info on what to do, then the link down the bottom takes them to the ruckus login page. It only works because of the entry in the walled garden to allow unathenticated users to 192.168.31.253 . Does that make sense?

Also to add sw guy has been very good. Last suggestion is to have a virtual switch for every vlan. We don't have enough physical nics to do this though

Will do later when I'm attached to my pc

We do this a different way. We direct them to a page that has the cert on first allowed in ruckus without auth. Then there is a link at the bottom to the ruckus login. Someone else on edugeek gave me idea so can't take credit

Hi All Anybody else using smoothwall on hyper-v with VLANS willing to let us know how you are setup. We were experiencing weird issues with dropped packets manifesting itself as page load problems sporadically, especially visible with HTTPS Old setup Hyper-V server hosting Smoothwall VM. 2 Virtual switches. 1 with WAN and 1 with a team of 2 NICs to LAN. Smoothwall had 5 Virtual NICS with 3 of them tagged with VLAN 10, 20, or 30 for our 3 byod networks connected to the LAN vSwitch, 1 connected to the LAN vSwitch but no VLAN tagging and 1 connected the the WAN vSwitch, in the Hyper-V VM settings. Inside Smoothwall these were just presented as 5 Interfaces. On the switch we have VLAN1 untagged and 10, 20, & 30 tagged on the 2 ports that connect to the team to the Hyper-V server. Each network worked as expected. However we were getting lots of dropped packets on the LAN and the sporadic page loads. New setup as requested by SW support. Hyper-V server hosting Smoothwall VM. 2 Virtual switches. 1 with WAN and 1 with a team of 2 NICs to LAN. Smoothwall now has 2 Virtual NICS, 1 connected to the LAN vSwitch but no VLAN tagging and 1 connected the the WAN vSwitch, in the Hyper-V VM settings. Inside Smoothwall I have created 4 VLAN interfaces using LAN as the parent. 1 LAN untagged, 1 VLAN10, 1 VLAN20, and 1 VLAN30. All have relevant IP addresses on the respective subnets. untagged LAN network all works fine but none of the VLANed ones do. Could anybody share their config if they have similar setups. Love you

I'm win 10 x64, Office 2016 x86, Lastest flash and I can replicate the issue This tool though could be good to restore these files short term How to restore a PowerPoint file corrupted by Flash I've also successfully "fixed" files by unzipping the pptx/pptm file and editing all of the activex$.xml files in ppt/activeX/ replace the content of them from this to this as per comment Alexey Malov's comment at 10:09:02 AM GMT+00:00 Sep 23, 2015 from here https://bugbase.adobe.com/index.cfm?event=bug&id=4062206 - - - Updated - - - I'm win 10 x64, Office 2016 x86, Lastest flash (mental me) and I can replicate the issue This tool though could be good to restore these files short term http://www.ispringsolutions.com/blog/how-to-restore-a-powerpoint-file-corrupted-by-flash/ I've also successfully "fixed" files by unzipping the pptx/pptm file and editing all of the activex$.xml files in ppt/activeX/ replace the content of them from this to this as per comment Alexey Malov's comment at 10:09:02 AM GMT+00:00 Sep 23, 2015 from here https://bugbase.adobe.com/index.cfm?event=bug&id=4062206

I found with some boardworks stuff saving as pptm fixed these issues. Careful though as this broke some so make a backup before

Omfg hahaha

The system just works Colin. It's very good. Big update just released but haven't installed yet.

Is this not what the unfiltered smart cache is for? You should be able to request access to it for an swgfl ip through the support desk

We've set up scvmm to do something similar. Not used it in anger yet but gives users a pool of resources with a self service front end

Right click tools are life changing in sccm

We had kaspersky before scep and it made me and my team want to gouge our eyes out with a rusty spoon

We use SCEP through SCCM too. Breeze to setup and no problems since we started using it 9 months ago. Some people don't rate it though. On a course I went on the tutor was amazed we were using it.

Same here @Sheridan . The small amount pcs we have upgraded are the fastest by a country mile. I was wetting myself when I saw how a core2duo wiped the floor with an i5 but most people have not noticed or just stopped complaining

Direct access is also awesome

We're using AD . Will have a look tomorrow

Ours defo doesn't. Have you tried recreating the smoothwall ca?

Sounds like an "ipad thing" asking for the password

I was very disappointed too. We'd had a demo by iboss and it looked awesome. Will ask the boss who he went through.