Techsoft LaserCAM A2+ Driver

[pritchardavid]

Anyone got a copy of this driver? Technology as lost the disc and we just reimaged all the computers leaving the laser cutter not working! Have emailed them asking for a link, but there taking ages to get back to me. Would be great if any one as a copy, have tried for ages searching google for it, with no luck of course.

 

Many Thanks

[Vine]

Hi Richard,

 

Are you after 95, Xp or Win7? Bear in mind there is no driver compatible with 64-bit architecture.

[pritchardavid]

Hi thanks

 

but they managed to get back to us in the end, so all sorted a while back

 

 

but many thanks through Richard

[DarshanC]

Hi thanks

 

but they managed to get back to us in the end, so all sorted a while back

 

 

but many thanks through Richard

 

 

Hi, do you still have the drivers? We are in the same situation. :/

[ChrisH]

I think I have the ones you need PM me your email and I will send them.

[pritchardavid]

Did you manage to get this from Chris? if not I'll zip it up if you give me your email address. I don't understand why Techsoft don't put their drivers on their website

[ChrisH]

I found it and was going to send it before I left work but @DarshanC didn't leave his email in his message.

[DannySkarratts]

Sorry to ressurect an old thread, but we've got ourselves in the same situation, does anybody still have this driver?

[pritchardavid]

not sure where my colleague put the memory with this one

 

but if you email a request for driver to this email address they will email you them [email protected]

[DannySkarratts]

Hi, thanks for the reply, I emailed them last Thursday. Do they usually take a while to get back to you?

 

Cheers!

 

Danny

[pritchardavid]

I think they got back to me the same day or the next day

[Vine]

Hi,

 

Send me a PM with your Email. I have 32 bit and 64bit drivers for the LaserCAM A2+ and a 32 bit driver for the LaserCAM A2.

[Vine]

Hi Richard,

 

Are you after 95, Xp or Win7? Bear in mind there is no driver compatible with 64-bit architecture.

 

404 - There is a 64-bit compatible driver for the A2+, there isn't for the A2....

 

EDIT: Email sent to Danny.

Edited October 10, 2012 by Vine

[pritchardavid]

@Vine

 

Can you send me this to please, I never had the 64bit driver, so that would enable all the computers in the DT room to be 64bit

 

email is ict @ theockendonacademy .com

 

thanks

[Vine]

Sure! As the only 64-bit driver for this series i'm assuming you're after the A2+. Email going over to you now.

[jbristow]

Hi

 

Im working in a school that has an A2 Laser cutter and was wondering if any of you's you send me the driver for it

 

Plz and thanks

[Vine]

Sure!

 

Send me a PM with the email address and you'd like me to send them too.

 

Viney.

[jbristow]

Hi i posted this just before i sent techsoft an email and they've sent my the driver but thanks anyway

[Vine]

That's alright

 

If anyone needs these drivers at all send me a PM with what driver you're after and what email you'd like them to be sent to. No need to keep posting

 

Viney.

[Vine]

2 emails sent.

 

I for one think TechSoft should do up their website and have a nice little tidy section for all the drivers, software and firmware updates.

[jaminben]

Hi,

 

Anyone got a WinXP driver for a LaserCam A3? I've emailed TechSoft but in a rush so thought I'd post here as well to cover all bases

 

Thanks

Edited February 5, 2013 by jaminben

[Adrena1in]

Hi all,

 

I don't suppose anyone is able to email me the Windows 7 32-bit driver for the Laser Cam A2 by any chance please? If there is one...Techsoft suggested there was only an XP one. We've installed it, but we can't seem to get it to work fully. The Laser Cam works, but we can't change any of the Laser Settings in the printer, such as increasing the power or decreasing the cutting speed. (Well, it let's us change these settings, but as soon as we click OK it reverts to the Defaults. For some materials the Default settings are not enough.)

 

Any help would be most appreciated, thanks.

 

Tim.

[DarshanC]

Hi Tim. Send me your email address in a PM and ill send you the drivers.

 

Darshan.

[Jowley]

About to give you a shout Darshan. Am out for the Windows 7 Drivers for the A2

 

Cheers

[DrPerceptron]

Hi all,

 

I don't suppose anyone is able to email me the Windows 7 32-bit driver for the Laser Cam A2 by any chance please? If there is one...Techsoft suggested there was only an XP one. We've installed it, but we can't seem to get it to work fully. The Laser Cam works, but we can't change any of the Laser Settings in the printer, such as increasing the power or decreasing the cutting speed. (Well, it let's us change these settings, but as soon as we click OK it reverts to the Defaults. For some materials the Default settings are not enough.)

 

Any help would be most appreciated, thanks.

 

Tim.

 

Did you change the permissions on the driver files?

 

I can't find the info on what you need to do (we gave staff full control I know that much), presumably it's over the files in c:\windows\system32\spool\drivers... that are in the zip.