chrisgj6 Posted January 4, 2011 Posted January 4, 2011 Hi, We want to buy a new set of stereo speakers for our Av-3016 amplifier. Can you give us some technical specifications about the amp? I don't know a lot about speakers but I believe we need to match the power, impedance etc. Thanks Chris
3s-gtech Posted January 4, 2011 Posted January 4, 2011 Looks like it's a 100w 5 channel amp, can't find the channel power breakdown. For simplicity, a pair of 8ohm speakers should fit fine with it, won't need big power handling (doubt this will put out more than 25W per channel). 1
TRobinson Posted January 5, 2011 Posted January 5, 2011 (edited) Here are the specs for the Amplifier and the speakers - I have also attached the spec sheet for the ActivBoard+2 v1 system... ...................................................Amplifier................................Loudspeaker Power Output (RMS)...............2 x 35w (8ohms).........................2 x 13w (6ohms) Audio Distortion........................0.5% (@1KHz)...................................5% Frequency Response..............20Hz-20KHz@2dB...........................80Hz-20KHz Signal to Noise Ratio.....................>80dB.........................................91dB Dimensions w x d x h (mm).......430 x 285 x 101........................165 x 142 x 225Activboard+2_system_specs_280307.pdf Edited January 5, 2011 by TRobinson 1
Recommended Posts