Jump to content

Recommended Posts

Posted

Hey all,

 

basically I'm looking to replace a setup here thats become a nightmare.

 

In one of our offices we've a meeting room with two projectors, that are connected to a PC and also two floor boxes with VGA inputs

 

This is all controlled by a Crestron multi switch system with a touchscreen remote - I'm sure at one point this was very shiny and new and lovely, but its a flaming nightmare to deal with. I've now lost my rag with it as its started to require a reboot before each use...

 

So, I'm wondering if anyone has any recommendations for a multi-in/mulit-out AV switch system - preferably with nice big hardware switches ;-)

 

So I'm looking for at least three inputs and two outputs - Ideas?

Posted

A KVM not suitable I guess if you need multi inputs?

 

I have a set up of a KVM and a switch box (VERRRRY old now) that gave me 2 inputs and (depending on the KVM) many outputs. Very simple, no tech behind it.

  • Thanks 1
Posted

If it were me, I'd be looking at getting the Crestron stuff fixed, rather than replacing with less capable equipment.

 

Failing that, Kramer stuff is OK at the school money end of the spectrum.

Posted

The second of those looks ideal bossman thanks! I'd just have to pass the output to a display replicator, no hardship really.

 

Not come across extron before - cheers!

 

I'll try and get a pic of whats currently in there - its so OTT you wouldn't believe ;-)

Posted
If it were me, I'd be looking at getting the Crestron stuff fixed, rather than replacing with less capable equipment.

 

Failing that, Kramer stuff is OK at the school money end of the spectrum.

 

Its not fit for purpose, was sold to the company by a contracted media installer, and is a nightmare to deal with - after 3 years of it I'm beyond done...

 

Basically just wanted to stick something flash in to milk them from what I can see.

Posted
I second the Extron equipment, their products have never let me down. If you go for any other solution you might need to think about the control system (since I am guessing that the Crestron system is all in one? AV switching and control?) you may need additional components other than the switcher.
  • Thanks 1
Posted
I've had mixed quality with Extron some is ok and some is poor. I had some simple splitters ages ago from them and they were just not sharp. I'd consider a Kramer product, not cheap for high end switcher scalers, but Ive done some pritty good AV setups with them and they are very idiot proof.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...