Delgwapo Posted September 21, 2010 Posted September 21, 2010 Hello. Has anyone had any luck removing permanent pen stains from a projector screen? I've tried using CPC foam cleaner, graffitti remover and whiteboard cleaner to no avail...
creese Posted September 21, 2010 Posted September 21, 2010 Try: Over writing with dry markers, leave for a few minutes and rub off. Pencil eraser One of those magic sponges. I would test a small area or spare board first. 1
pscott Posted September 21, 2010 Posted September 21, 2010 NOBO|34533943|WHITEBOARD DEEPCLENE | CPC Just the job! 1
MatthewL Posted September 21, 2010 Posted September 21, 2010 Brasso then wipe down with a damp cloth once you have removed it. 1
tech_guy Posted September 21, 2010 Posted September 21, 2010 We use either the graffiti remover but you have to be careful as it can make the screen turn yellow if you use too much and rub too hard. If that doesn't work, then I've found that the alcohol based hand sanitising stuff can be pretty good at getting things off. Failing that, there's always good old ethanol - your science techs should have some. Watch it though, it's lethal stuff! Especially if you're smoking whilst using it 1
solitaire89 Posted September 21, 2010 Posted September 21, 2010 Sci Tech hat on now... Yip, ethanol or propanone (acetone). Use cotton wool and gloves! Oh, and as usual, test on an inconspicuous area of board first, just in case, especially as I don't know what your board is made from And don't smoke, or be tempted to drink the ethanol. 1
Delgwapo Posted September 21, 2010 Author Posted September 21, 2010 Thanks for the advice everyone! I've just found some of that Deepclene stuff hidden in the office. Will give it a whirl later. I'll try the other suggestions and post my results...
TechMonkey Posted September 21, 2010 Posted September 21, 2010 We have a bottle of Isopropyl Alcohol we liberated from the Science department. Cleans just about anything off. we use it sparingly though as I think we were told they aren't allowed it any more so no prospect of filling up again.
john Posted September 21, 2010 Posted September 21, 2010 We have a bottle of Isopropyl Alcohol we liberated from the Science department. Cleans just about anything off. we use it sparingly though as I think we were told they aren't allowed it any more so no prospect of filling up again. IPA is used in termination of Fibre Optics so its easily obtained and justifiable 1
MatthewL Posted September 21, 2010 Posted September 21, 2010 Forgot about the alcohol hand stuff. I have a bottle used in GP surgeries which cleans stuff up very nicely, its made by Braun if anyone is interested and is in a green container. It would be classed as medical supplies. Many hospitals/surgeries have stopped using this front line because people were stealing it for the alcohol content and a few have died due to it!!
rpascall Posted April 12, 2018 Posted April 12, 2018 Brasso then wipe down with a damp cloth once you have removed it. Who would have thought brasso would work, worked perfect! Thanks
MatthewL Posted April 12, 2018 Posted April 12, 2018 Was a tip from a design tech teacher when working with plastic!
Syman_a Posted April 13, 2018 Posted April 13, 2018 WD40 is also useful for removing permanent marker.
ICTDirect_Dave Posted April 13, 2018 Posted April 13, 2018 Brasso cleans anything!!! It's magical. Back in the day, if you had a badly scratched cd/dvd then a polish with some brasso would usually get it working again!
jmak Posted April 13, 2018 Posted April 13, 2018 It is good - but it is abrasive. Quite gentle, but don't overuse it [emoji846]
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now