Michael Posted December 8, 2008 Posted December 8, 2008 Hello all, I have a question I hope you audio enthusiasts can help me with - I'm working at a school where they have speakers installed for whiteboards. These speakers are wired into an amp and then a dual VHS/DVD player is also connected into this. The other classrooms currently have no fixed speakers and are using portable speakers with a 3.5mm jack. This does add a problem getting sound to work with the dual VHS/DVD player as this uses a phono connection. I've used active speakers before, as they're cheaper, but also they do not require an amplifier which reduces the cost per classroom considerably. This would work perfectly with any PC, but still, there's a problem getting sound from the VHS/DVD player. I bought a cable like this would the sound work? Alternatively is there an adapter/hub/switch I can buy which allows a single 3.5mm in, then 1 x 3.5mm and 1 x phono out? This would allow all cables to remain connected and just require switching over of the audio required (hope this makes sense). Many thanks
localzuk Posted December 8, 2008 Posted December 8, 2008 We have a load of speakers with adapters like the one linked - work fine. Only thing I've found is simply that they don't last - the adapters go walk about, the speakers go pop etc... much quicker than an amp+speakers based system. That's why I'm now buying ACOUSTIC SOLUTIONS|SP103|HIFI AMPLIFIER, STEREO | CPC and some 45W wall mounted monacor speakers. A complete setup comes to about £85, and will last at least 4 years. We seem to get through the cheap 3.5" jack type speakers (costing about £35 a set) about once a year. 1
EvLPhenom Posted December 8, 2008 Posted December 8, 2008 Here we plug the speakers into the 3.5mm audio out port on the computer and then use a phono to 3.5mm jack and plug that into the audio in port on the computer (usually the blue port) and then the sound runs through the pc and back out through the speakers. hope this helps, you could have a look here for an idea for cables - Gold-Plated 2 Phono Sockets to 3.5mm Stereo Plug Adaptor > Maplin 1
LeMarchand Posted December 8, 2008 Posted December 8, 2008 I'd second the "get a fixed amp" suggestion for much the same reasons. If not, you can certainly get phono switches ([ame=http://www.amazon.co.uk/Red-Phono-Selector-Switch-Bulk/dp/B000LARTHQ/]an example[/ame]) and use a couple of adapters. 1
plexer Posted December 8, 2008 Posted December 8, 2008 We use the Nuvo Wall Amp and speakers, the amp mounts into a deep single gang back box on the wall and 2 devices can be wired into the back of it. It also has 2 3.5mm front jack inputs that mimic the back ones and you just switch them over with a small switch on the front. Ben
Andrew_C Posted December 8, 2008 Posted December 8, 2008 (edited) I too would use separates. I've installed lots of these two items (again from CPC). It allows the flexibility to have up to 4 stereo sources, but in most cases I only have a VCR, DVD and PC, with the MFL rooms still having cassette recorders. They do take microphones, but I've never experimented with this. Amplifier Speakers Edited December 8, 2008 by Andrew_C y
ANiceEnglishman Posted December 8, 2008 Posted December 8, 2008 Another vote for the Nuvo Wall Amp and Speakers here. The amp and PSU fit inside our existing trunking with a flying lead terminated in the appropriate connector. The speakers are mounted high on the wall out of kids' reach. Nothing to go walkies and just one control marked 'volume' which is nice and easy to understand for the less technically minded members of staff.
mortstar Posted December 8, 2008 Posted December 8, 2008 We use the Nuvo Wall Amp and speakers, the amp mounts into a deep single gang back box on the wall and 2 devices can be wired into the back of it. It also has 2 3.5mm front jack inputs that mimic the back ones and you just switch them over with a small switch on the front. Ben +1 ...
Marci Posted December 9, 2008 Posted December 9, 2008 We use the Nuvo Wall Amp and speakers, the amp mounts into a deep single gang back box on the wall and 2 devices can be wired into the back of it. It also has 2 3.5mm front jack inputs that mimic the back ones and you just switch them over with a small switch on the front. As do we, 1 in every classroom, but in the past 6 months we've had to replace almost 50% of them as they've packed in for no reason. Not reliable at all. We won't be using them again.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now