Olliedawg Posted December 21, 2023 Posted December 21, 2023 Question for you Vmware wizards I have two hosts - - Host A = ESXI 8.0 - Host B = ESXI 6.5 (i know don't yell at me!) At the moment, all critical VM's are on Host A & I would like to move my second DC onto Host B, so there is some resiliency incase of a total failure of one of the hosts. The VM i'm trying to move was created on Host A & is running Server 2022. I have tried using the Vmware Converter Client. This does happily move/copy across the VM to the other host, however I cannot get it to boot unless I boot into safemode.. When I look in device manager in safe mode, it says there is an issue with a "Generic PnP Monitor" Driver. I have tried uninstalling this/disabling while in safe mode, however no dice. If I leave the VM to run on the Boot splash screen with the windows logo, the circle just spins forever, sometimes even freezes all together. Is there a compatibility issue with running a newer VM on an older ESXi? I would have thought that with it only being a couple of versions behind, it wouldn't have been an issue One thing I haven't tried yet, is doing a full VM restore using Veeam, instead of using the converter.
mrbios Posted December 21, 2023 Posted December 21, 2023 (edited) It'll depend on the VMs hardware compatibility level. If its hardware compatibility level is higher than v13 (The highest level available to esxi 6.5) the VM created on a newer host won't work on an older one. See the compatibility matrix here: https://kb.vmware.com/s/article/2007240 Worth noting that downgrading a VMs hardware compatibility level isn't supported, it's a one way street. Edited December 21, 2023 by mrbios 1
Olliedawg Posted December 21, 2023 Author Posted December 21, 2023 It'll depend on the VMs hardware compatibility level. If its hardware compatibility level is higher than v13 (The highest level available to esxi 6.5) the VM created on a newer host won't work on an older one. See the compatibility matrix here: https://kb.vmware.com/s/article/2007240 Worth noting that downgrading a VMs hardware compatibility level isn't supported, it's a one way street. That explains it then, the VM is unsupported on the older ESXi. Maximum VM Compatibility I can select in the converter is 14. Thank you!
Davit2005 Posted December 21, 2023 Posted December 21, 2023 If it is jus a VM running AD Directory Services/DNS can you jus not rebuild a DC on the old infrastructure and migrate the services? A bit of work but I personally would not be mucking around to much with DCs, but would give you redundancy if you lost a host for any reason.
Olliedawg Posted December 21, 2023 Author Posted December 21, 2023 If it is jus a VM running AD Directory Services/DNS can you jus not rebuild a DC on the old infrastructure and migrate the services? A bit of work but I personally would not be mucking around to much with DCs, but would give you redundancy if you lost a host for any reason. Yea its just a barebones secondary DC, has the basic roles installed & AAD connect setup in staging mode.. I left it as is & fired back up on original host when I discovered that I couldn't run the VM on the old host. I'm going to either look at upgrading the ESXi on Host B to 8.0 (if it supports it, haven't had chance to check yet - HP ProLiant Gen 10), or replacing the server all together & buying lower spec Dell Poweredge just to run the second DC & some other stuff, so theres a bit of resilience in the event of a failure. We do have next day warranty on the main server, however its the downtime inbetween.
3s-gtech Posted December 21, 2023 Posted December 21, 2023 It almost certainly does support it, and should work even if not certified unless that matters.
Olliedawg Posted December 21, 2023 Author Posted December 21, 2023 It almost certainly does support it, and should work even if not certified unless that matters. I couldn't seem to get it to boot once it was copied over to the host running ESXi 6.5 (unless i booted into safe mode).
3s-gtech Posted December 21, 2023 Posted December 21, 2023 Your host should support 8.0, is what I mean!
Olliedawg Posted December 21, 2023 Author Posted December 21, 2023 Your host should support 8.0, is what I mean! Oh sorry haha! Yes going to look into over the holiday on a quiet day
Olliedawg Posted December 27, 2023 Author Posted December 27, 2023 Working from home today - did a fresh ESXi install to 8.0 (to an SD card, not ideal but will do), I now have moved the secondary DC over to the other server so I have a bit of redundancy now! Hope you are all enjoying the Christmas break 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now