Simcfc73 Posted November 25, 2020 Posted November 25, 2020 Anyone know why this projector might be overheating? Years of slack maintenance has left it unloved int he food room... smells of grease and is a bit sticky too. 1
StevieM Posted November 25, 2020 Posted November 25, 2020 Years of slack maintenance has left it unloved int he food room... smells of grease and is a bit sticky too. That sounds a bit like me.
round2it Posted November 25, 2020 Posted November 25, 2020 not worth the bother get a new one could be a dodgy bulb tho i have some that say overheating and when i change the bulb they go back to normal a good clean might help tho
3s-gtech Posted November 25, 2020 Posted November 25, 2020 I was asked to put a projector in the food room. I said it was a silly idea and put in a TV - at least that's passively cooled and against a wall away from the cookers.
psydii Posted November 25, 2020 Posted November 25, 2020 Looks fine to me. Have you tried turning it of and on again?
Simcfc73 Posted November 25, 2020 Author Posted November 25, 2020 Its an Optoma EX530 which we've had for over 11 years and served us well... still have about 5 going strong. Something goes wrong with the picture on them eventually where you get loads of dots over the screen which gets worse over time... can't remember which part needs replacing but its not worth it. The throw on them is really flexible too so replacing them has always been a bit of a pain. I did ask if she wants a TV but she likes to write on the board... and we aint buying smart tvs.
paulkerton Posted November 25, 2020 Posted November 25, 2020 Something goes wrong with the picture on them eventually where you get loads of dots over the screen which gets worse over time... That'll be dust getting onto the LCD.
OldTimeIT Posted November 25, 2020 Posted November 25, 2020 This is a fault known as creeping degradation. The individual mirrors on the DLP chip fail, either in the always on state or always off. Almost all of the Optoma projectors we had failed in this way. By contrast I have never had an Epson projector fail. Still have a lot of EB-X9s running faultlessly despise teachers efforts to ruin them by leaving them on all hours!
Simcfc73 Posted November 25, 2020 Author Posted November 25, 2020 This is a fault known as creeping degradation. The individual mirrors on the DLP chip fail, either in the always on state or always off. Almost all of the Optoma projectors we had failed in this way. By contrast I have never had an Epson projector fail. Still have a lot of EB-X9s running faultlessly despise teachers efforts to ruin them by leaving them on all hours! That's the term I was looking for, I did some research years ago when our first one went and stripped it down but it was a goner. Our oldest one is June 2008.
jmak Posted November 26, 2020 Posted November 26, 2020 OP says it's been there for 11 years. That kills the argument for a TV/flat screen. Can you imagine the state something electronic would be in if you put it where you could reach it while you were cooking?!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now