Gongalong Posted November 5, 2018 Posted November 5, 2018 Hi folks, We have a need for at least a PCI Express 2.0 x16 card that has three outputs to drive three displays. The ideal is at least one VGA output. By chance, has anyone come across a card guaranteed to do this? Thanks
ICTDirect_Dave Posted November 5, 2018 Posted November 5, 2018 What form factor do you need to fit it into? 1
Gongalong Posted November 5, 2018 Author Posted November 5, 2018 The mobo says PCI-E x16 (Intel DH61CR board). It's in a standard desktop case, so not constrained for space as such.
ICTDirect_Dave Posted November 5, 2018 Posted November 5, 2018 Looking at that board, I'd suggest the following. 1 x Quadro K600 (DVI, displayport) 1GB PCIe X16 - Full Height Card 1 x Quadro NVS300 (DMS59 - 2 x VGA via splitter) 512MB - PCIe X1 Full height card This setup would give you four outputs (1 x DVI, 1 x DP, 2 x VGA), with the K600 doing the grunt work and the NVS300 just providing outputs. Getting a card to do three outputs gets more expensive, especially from the stock I've got here. Whereas using two cheaper cards means you only have to shell out £30 plus a little postage 1
Fazza Posted November 5, 2018 Posted November 5, 2018 If you've only got one slot available then maybe look at a USB VGA adapter. 1
sted Posted November 5, 2018 Posted November 5, 2018 dosent displayport itself support multiple outputs from a single cable though iirc you need an adapter or a monitor that supports it and has a passthrough 1
thimon Posted November 5, 2018 Posted November 5, 2018 If all else fails we use USB to HDMI adapters which work fine. The cheaper ones don't support ultra wide monitors FYI 1
geohanson Posted November 5, 2018 Posted November 5, 2018 Looking at that board, I'd suggest the following. 1 x Quadro K600 (DVI, displayport) 1GB PCIe X16 - Full Height Card 1 x Quadro NVS300 (DMS59 - 2 x VGA via splitter) 512MB - PCIe X1 Full height card This setup would give you four outputs (1 x DVI, 1 x DP, 2 x VGA), with the K600 doing the grunt work and the NVS300 just providing outputs. Getting a card to do three outputs gets more expensive, especially from the stock I've got here. Whereas using two cheaper cards means you only have to shell out £30 plus a little postage I’m running 2x NVS300 cards (both from ICT Direct) to give me a total of 4 VGA outputs. I think the NVS310 has dual DisplayPort outputs and the NVS300 will do either VGA or DVI depending on which DMS59 splitter you have. Works great for me but I’m not running anything that’s GPU intensive. 1
synaesthesia Posted November 5, 2018 Posted November 5, 2018 Was about to suggest any of the Matrox line of cards as they are geared for this job exactly, however it's unlikely you wish to remortgage your home having just seen the price! 1
Gongalong Posted November 5, 2018 Author Posted November 5, 2018 Getting a card to do three outputs gets more expensive, especially from the stock I've got here. Whereas using two cheaper cards means you only have to shell out £30 plus a little postage It only has the one PCI-E slot though, as far as I remember, is that an issue?
ICTDirect_Dave Posted November 5, 2018 Posted November 5, 2018 It only has the one PCI-E slot though, as far as I remember, is that an issue? Looking at this:https://ark.intel.com/products/51857/Intel-Desktop-Board-DH61CR It suggests you ave 1 x X16 and 2 x X1 slots. That would support the dual card approach I suggested
Sephiroth Posted November 5, 2018 Posted November 5, 2018 @ICTDirect_Dave I assume that the NVS300 has an X1 slot, making that a viable option. If you need something powerful, you could go with an AMD Radeon WX2100 with 3 DP connectors, but if it's just to drive 3 screens, Dave's suggestion is much cheaper!
ICTDirect_Dave Posted November 5, 2018 Posted November 5, 2018 @ICTDirect_Dave I assume that the NVS300 has an X1 slot, making that a viable option. If you need something powerful, you could go with an AMD Radeon WX2100 with 3 DP connectors, but if it's just to drive 3 screens, Dave's suggestion is much cheaper! Yep, I've got a few NVS300's with the X1 connection I used to drive three screens with an x16 & X1 NVS300 back when i used an old HP 8000 here. And for power, we've got Quadro K4000's with 3GB GDDR5, but they're like £140 or something and don't come with VGA.
Garacesh Posted November 5, 2018 Posted November 5, 2018 You can always jump into the BIOS and not disable the onboard display adaptor in the presence of an expansion card. That way you only need to get a GPU that can do 2 outputs and stick with the onboard for the 3rd. 1
LeMarchand Posted November 5, 2018 Posted November 5, 2018 I've got an old VTX3D X-Edition Radeon HD 7770 from home at one site and an XFX Radeon HD 6850 from eBay at another. Both driving 3 displays with the use of adapters. Not doing anything fancy, though - just driving 3 displays because it looks impressive. 1
SamanthaD Posted November 5, 2018 Posted November 5, 2018 Matrox triplehead2go external boxes aren't too bad, need a half decent card in the case to drive them though!
chazzy2501 Posted November 5, 2018 Posted November 5, 2018 if you MUST have a native VGA port then a last gen card is the way to go £45 for this plop would work well. The GeForce 710 https://www.amazon.co.uk/dp/B01AY794B4/ref=twister_B01C8T2FHG?_encoding=UTF8&th=1 Otherwise an RX550 (£100) with a dp to vga adaptor. (£6) DVi connectors are digital only on modern cards.
TomHD Posted November 5, 2018 Posted November 5, 2018 I have a MSI GTX 750ti in my office PC and am running 3 22" monitors, 2 landscape and one portrait with no issue. It has 4 outputs but can only support 3 monitors at once but you can switch to the fourth
Danp Posted November 12, 2018 Posted November 12, 2018 I have a pair of GeForce GT720 in my machine, simple 1gb cards but I could run 6 monitors if I wanted (only run 2 at the moment, have had 4)
Gongalong Posted November 27, 2018 Author Posted November 27, 2018 Many thanks to @ICTDirect_Dave who sorted out two cards at a very reasonable cost, and then also sent out a replacement cable for one of the cards at no extra cost (when I must have accidentally thrown the first one away!). 1
ICTDirect_Dave Posted November 27, 2018 Posted November 27, 2018 Many thanks to @ICTDirect_Dave who sorted out two cards at a very reasonable cost, and then also sent out a replacement cable for one of the cards at no extra cost (when I must have accidentally thrown the first one away!). Absolutely no problem at all Glad we could help! 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now