Jump to content

Recommended Posts

Posted (edited)

Hello,

 

Can anyone tell me where I can find Digital signage screen brackets similar to this please?

 

https://www.adorama.com/cradcpu40.html

 

We are unable to mount the PC on the back (dell optiplex micro of the screen so it will need to go onto the bracket itself. The PC can't be behind the TV itself, there isn't enough space, its too close to the wall.

 

Thanks

Edited by FN-GM
Posted (edited)

I did consider them, but by the time we have Windows on, there isn't much space left for content such as HD videos. 32GB won't stretch that far?

 

Also are they 32 bit only?

Edited by FN-GM
Posted
I did consider them, but by the time we have Windows on, there isn't much space left for content such as HD videos. 32GB won't stretch that far?

 

Stick a micro SD in? (Or add a USB drive?)

Posted (edited)
Ah didn't twig it had micro SD. What about the 32 Bit thing please?

 

There are a couple of flavours bud but here is a review: Best PC Compute Sticks | Windows Central

 

Also found this: http://www.intel.com/content/www/us/en/support/boards-and-kits/intel-compute-stick/000005899.html

 

 

Hope this helps we bought ours a couple of years back with Windows 8.1 which was 64Bit so the Windows 10 Pro should be the same as it states here although a little pricey me thinks.

 

You could always use a Rasberry PI as others have used on here but not as small.

 

Good Hunting bud :)

Edited by bossman
Posted

Have you tried bribing your friendly Technology dept with biscuits?

 

They could knock something up with a welder, existing TV bracket, some angle iron and a bench grinder to smooth out the welds. Then just powder-coat if the oven's big enough or use some plasti-coat/dip.

Posted (edited)
Could you not try and run it off the tv USB ports? (Unsure what tv your using)

 

It does have a USB 2.0 port, I have a feeling it won't be powerful enough. At home I have a PI 3 with Open Elec and the USB port on my TV isn't enough to power it and it keeps crashing. Another concern is that the stick won't be closing down properly when the TV is switched off. I have a USB A to C cable for my OnePlus 3 so I will give it a try.

 

I also wish these sticks had the ability to switch on at a set time automatically in the BIOS.

Edited by FN-GM
Posted (edited)
Posted
It was more of an example really. But I am struggling to find an adapter that is small enough to fit behind the screen.
Posted
Could you get the socket you are plugging it in to changed to something like this? There are lots of others available, first one I came across, so not sure what it's like.

 

LAP 13A 2G SP Socket + 4.2A 4G USB Charger White | Switches & Sockets | Screwfix.com

 

Steve

 

I had thought that but 2 issues

 

1. PFI building so will require a change order that can take 6 months. Plus it will cost quite a lot of money.

2. Can't find any sockets that have USB-C ports.

 

Thanks

Posted
I can't find the Anker one in stock in the UK

It's in stock on Amazon? "Fulfilled by Amazon" would come from Amazon's warehouse. :confused:

 

Btw, I have that exact Anker adapter at home if you need any measurements?

Posted
It's in stock on Amazon? "Fulfilled by Amazon" would come from Amazon's warehouse. :confused:

 

Btw, I have that exact Anker adapter at home if you need any measurements?

 

Nope all out of stock :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...