localzuk Posted February 8, 2017 Posted February 8, 2017 Next one then. This should be a little harder... With all that power related circuitry - some form of comms card?
Willott Posted February 8, 2017 Posted February 8, 2017 Some sort of Riser card - pci-e to pci? (one of the chip numbers is a PCIe bridge)
soapyfish Posted February 8, 2017 Posted February 8, 2017 (edited) PCI-e Modem with 8 RJ11 connections or other Tel-comms device with 8 connections I am pretty sure that those silver blocks with the yellowish inserts are seen on modems/(other Tel-Coms Kit) not n anything else but I could be wrong This is the closest Comparable hardware I can locate https://www.perle.com/productimages/pci-ras%208%20port_xlg.jpg Edited February 8, 2017 by soapyfish
ICTDirect_Dave Posted February 8, 2017 Posted February 8, 2017 PCI-e Modem with 8 RJ11 connections or other Tel-comms device with 8 connections I am pretty sure that those silver blocks with the yellowish inserts are seen on modems/(other Tel-Coms Kit) not n anything else but I could be wrong This is the closest Comparable hardware I can locate https://www.perle.com/productimages/pci-ras%208%20port_xlg.jpg You're narrowing it down a little Not that though. you're way out on the number of connections too.
synaesthesia Posted February 8, 2017 Posted February 8, 2017 Chunky-ass components on something so relatively modern. That narrows it down to someone who doesn't specialise in computer hardware, but has to interface with it and does a fairly crap job as a result! It's not Juniper is it? 2
ICTDirect_Dave Posted February 8, 2017 Posted February 8, 2017 Chunky-ass components on something so relatively modern. That narrows it down to someone who doesn't specialise in computer hardware, but has to interface with it and does a fairly crap job as a result! It's not Juniper is it? hahaha! no, but it made me lol
Willott Posted February 8, 2017 Posted February 8, 2017 (edited) 2 ports, ISDN? maybe not RJ11 (seem to be 8 tracks going to possible ports on the right hand side of picture)? Further looking - 48 channel E1 fax modem? Edited February 8, 2017 by Willott
ICTDirect_Dave Posted February 8, 2017 Posted February 8, 2017 2 ports, ISDN? maybe not RJ11 (seem to be 8 tracks going to possible ports on the right hand side of picture)? Further looking - 48 channel E1 fax modem? That's close enough. It's one of these beauties. Brooktrout TR1034+E8-8L-R 901-007-12 Fax Board | eBay
Willott Posted February 8, 2017 Posted February 8, 2017 Damnit Dave, I was on the dialogic website trawling my way through possible options! 1
ICTDirect_Dave Posted February 8, 2017 Posted February 8, 2017 Haha! Well good detective work right there! I'm gonna see what else I can find to tax you lot later on.
Dos_Box Posted February 8, 2017 Author Posted February 8, 2017 My turn. Just to make it a bit harder, this has been modded.
sted Posted February 8, 2017 Posted February 8, 2017 My turn. [ATTACH=CONFIG]41432[/ATTACH] Just to make it a bit harder, this has been modded. some old intel ide raid card?
soapyfish Posted February 8, 2017 Posted February 8, 2017 (edited) Voodoo 5 SLi 6000 Intel Revision 1 (model 1000-1900) Guru3d article on PCIe Express Scaling that has one interesing point | Overclockers Forums Edited February 8, 2017 by soapyfish 1
Dos_Box Posted February 8, 2017 Author Posted February 8, 2017 Voodoo 5 SLi 6000 Intel Revision 1 (model 1000-1900) Guru3d article on PCIe Express Scaling that has one interesing point | Overclockers Forums Yup, bit of a trick one as they never made it out to the shops before the company went 'POP'! They also required an external power supply!
synaesthesia Posted February 8, 2017 Posted February 8, 2017 I only recognised it as you've been chomping at the bit for one of those to come up! 1
soapyfish Posted February 8, 2017 Posted February 8, 2017 I recognize the fan labels, they only ever showed up on Voodoo 5 series cards as far as I know.
soapyfish Posted February 8, 2017 Posted February 8, 2017 Yea oldie core memory. Yep its Magnetic Core Memory
synaesthesia Posted February 8, 2017 Posted February 8, 2017 Hard to judge scale, is that the corner of an old AS/400?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now