vunsev Posted February 25, 2008 Posted February 25, 2008 Hi, I need to find out the ip address of my hp6108 core switch in order to log onto the console and check the event log. Any ideas?
ChrisH Posted February 25, 2008 Posted February 25, 2008 Port Scan and look for something with a web interface and telnet interface or use the arp command to bind an IP address to the Mac address which should be labeled on it somewhere. Failing that some of the HP management software will pick it up.
steveg Posted February 25, 2008 Posted February 25, 2008 Not sure if it applies to this switch, but most managed switches will have a serial port that will allow you to open up a terminal session and use the command line interface, which you will be able to use to view the ip address. Steve
ChrisH Posted February 25, 2008 Posted February 25, 2008 Not sure if it applies to this switch, but most managed switches will have a serial port that will allow you to open up a terminal session and use the command line interface, which you will be able to use to view the ip address. Steve That is also good advice I forgot about that one. You just have to make sure you find the right cable though as a normal serial cable wont work.
enjay Posted February 25, 2008 Posted February 25, 2008 Does the switch have a serial port on it? If so, hook up to that and use the CLI management console on it. Exactly how you do that varies from switch to switch, but the user manual should tell you everything you need to know.
Uraken Posted February 25, 2008 Posted February 25, 2008 who set your network up? they should have documented the switches ip address + any vlan configuration for you, you can fairly certain its outside of your dhcp scope of addresses so if you know what ip range your school has been allocated and you know what your servers and printers have been staticlly allocated by process of elimination you could assume that your switches will fall either inside or just outside that subnet. This may help when using angry ip if you have a stack of ip's to wade through, also angry ip won't have a netbios name for a switch.
Ric_ Posted February 25, 2008 Posted February 25, 2008 iirc by default hp switches do not have any ip assigned so you will need to hook it up over a serial cable.
Uraken Posted February 25, 2008 Posted February 25, 2008 some hp switches come without default ip's so you assign it as part of the setup routine after connecting to it via the console.
vunsev Posted February 26, 2008 Author Posted February 26, 2008 I conected a dull modem(serial to serial cable) to a computer and hyper terminaled to the switch.
nivetha Posted July 6, 2009 Posted July 6, 2009 U may try to Google search to find answer.And then we can find the any websites ip address by the siteIP-Details.com : Find your IP address Information
IanT Posted July 6, 2009 Posted July 6, 2009 I had to do this the other day for a HP Gig switch to find the IP out, grabbed my serial cable and found it out that way. Ian
budgester Posted July 6, 2009 Posted July 6, 2009 Try the 60 day trial HP Network Manager software plus. Software Summary B.02.20 - HP ProCurve Networking Then let it drop back to the basic version of the software. If you have more that a couple of HP switches it is worth investing in the full Plus version of the software. Regards Budgester 1
budgester Posted July 6, 2009 Posted July 6, 2009 iirc by default hp switches do not have any ip assigned so you will need to hook it up over a serial cable. If the switch hasn't had a manual IP address allocated, it will normally pick on up via DHCP.
CyberNerd Posted July 6, 2009 Posted July 6, 2009 If it has a DHCP assigned address just search the DHCP log file
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now