DL380 G7 SCSI Controller Drivers for Server 2012 R2 Standard

[mattx]

This is doing my head in - does anyone know what driver this is ? I've tried everything on the HP Web Site and nothing.

The server is a DL380 G7 running Server 2012 R2 and I can't locate this driver anywhere.

 

[john]

Did you install using the HP Install tools and have run the HP SPP afterwards to ensure its got all the drivers and software on it?

[3s-gtech]

That adaptor would appear to be a very old LSI Ultra 320 SCSI unit. Do you need it?

 

Appears to be: http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00212937

Edited September 3, 2015 by 3s-gtech

[mattx]

Ah ha - it could be the old tape drive it was connected to - let me have a look....

Forgot about that - I've been looking at server stuff.....

[mattx]

Only goes up to 2008 R2 by the looks of it for the drivers for that - never mind.

[IanT]

Not relevant really to this post but always useful to download the HP ProLiant Service Pack for latest drivers and firmware (if you have a support contract or in-warranty server)

[mattx]

Or HP pull their finger out and sort out a Smart Start for the G7's for 2012 - that is never going to happen though.

[IanT]

HP retired the Smart Start CD and DVD ages ago, the Gen8 and Gen9 models now come with Intelligent Provisioning, see below:

 

HP Blogs - Intelligent Provisioning replaces SmartStart CDs f... - The HP Blog Hub

[mattx]

HP retired the Smart Start CD and DVD ages ago, the Gen8 and Gen9 models now come with Intelligent Provisioning, see below:

 

HP Blogs - Intelligent Provisioning replaces SmartStart CDs f... - The HP Blog Hub

 

Well aware of that having built quite a few of those - just tend to forget what Function key to press at the relevant time.....