Wireless bridge for Photocopier

[caffrey]

Can anyone recommend a wireless bridge for a Konica Photocopier ? We're relocating it and there's no network points nor the ability to install one, so I'm thinking of something like a wireless bridge to make do.

[3s-gtech]

Also consider Powerline if feasible.

[mikkydoos]

Y. I'd do powerline if poss. WiFi is going to be slow, especially when printing images.

 

TP link do some ok ones.

 

Why not put a network socket in yourself ?

Edited November 11, 2014 by mikkydoos

[caffrey]

I've always ran away from homeplugs because of 1st gen experiences, I'm assuming they are better now ? I'd like to run a cable but it's a new build and it's in an area that wasn't specced for networking (atrium), it'll be hard to run a cable.

[MatthewL]

I'd never recommend using a photocopier on a wireless connection, use the powerline adapters if you cannot get a physical network point in.

[plexer]

Powerline will only work if the 2 sockets are on the same phase which they may not be.

 

Ben

[MatthewL]

Not always the case, I have them working on different ones in houses before.

[Chris_]

Not always the case, I have them working on different ones in houses before.

 

Houses are usually single phase.. Are you sure you've not been using them on different ring mains/circuits in a house?