Hp switch does not like NAS

[nicholab]

Hi our hp switch does not like our snlogy Nas it keeps shutting down the port any suggestions?

[pantscat]

Is it shutting down because of too many RX errors?

 

Tried a new patch lead? :-)

[nicholab]

Been changed to a new cable works when directly connected to laptop.

[Mcshammer_dj]

check the port settings

[pete]

What do the logs (show logging) on the switch say? It should give a reason why it shut down the port.

 

Then look into the fault-finder sensitivity settings (show fault-finder) if the NAS itself isn't doing anything dumb.

[Oaktech]

i've been noticing this a bit recently actually, certain devices struggle to negotiate a link with... throttle the port down to a fixed data rate, say 100mbps full and see if it stays up. If it does, go up to 1000full and see if it still stays up.

[southhamster]

We have a qnap 264l and found it would not talk to our cisco sg300 switch.a crossover csble did the trick! It may well be that a firmware update would fix it but we didn't have time to investigate further.