DavR

We've done this by deleting the below registry key; HKLM\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Run\Adobe Creative Cloud I think that's all we did, it's a while back now. You may also want to check under SOFTWARE\Microsoft\Windows\CurrentVersion\Run and see if there's anything under there that needs killing off too.

Ah, OK. I haven't tried connecting a Chromebook to an old-style ActivBoard, although Promethean seem to suggest it would work. I've not tried Classflow myself, we stuck with desktops and regular ActivInspire. It's free to create a Classflow account though, so I'd try it and see if it suits your needs - https://classflow.com/en-gb/

That is correct, you cannot run ActivInspire on a Chromebook. You can run a free web-based alternative called Promethean Classflow, which I think allows you to import and convert your old flipcharts, but doesn't work with them natively. Are you planning to run those Chromebooks connected to flat panel screens in classrooms? Depending on the kit available, you might find it easier to use the built-in web browser and presentation apps on the screens and dispense with the Chromebooks...

Fair enough, I can see those Stones not having TPM. I was pleasantly surprised to find our Dell desktops going back to 2014 having them though.

We use these in a couple of scenarios, and found they struggle to power an AP and a phone. We use them now to split a port between a PoE device and a few other regular LAN connections. The specs say they'll do either one Class 3, or, two Class 1/2 devices (assuming an 802.3at power input). They'll do VLANs if you need them, although the interface is a little eccentric.

Apologies if this seems too obvious and you've already looked, but..... have you checked whether these machines might have TPM, but have it disabled in the BIOS? I found a couple of models in our inventory that I didn't expect to have TPM chips, did, in this way.

I see stuff like that on the Repair Shop, and it really is fascinating, as well as very satisfying. I'm not sure I'd ever have the patience or dexterity to do what any of those guys could do, though!

I've always aimed for i5, and fallen back on i3 if prices demand it. TBF for what we ask of them, i3 is probably fine these days. Most of our desktops are Microsoft Office + web browsing these days, it's only mine that does anything remotely intensive.

I used to do a lot of walking, green spaces and/or general exploring, between 5-8 miles at a go. Good exercise, good for your mental health, and ideal for a Sunday so you're at least mildly pooped by bedtime Sadly I can't really do it at the moment due to health issues, but I'm working on it. I used to do gym once a week, but currently lapsed. I kinda loathe it, but also, after a good session you can feel great afterward, it's a great stress buster. Since I reduced my hours earlier in the year, I've been keeping moderately into the art scene, and taking advantage of being able to visit galleries on a weekday when they're quieter. Some of them have been baffling, but some I've found generally enriching, if I can get my head into the right space. Loving the Impressionists, lately!

Another +1 for the HP M400 series. We have M402 and M404 printers in use, each shared between two PCs, but there's probably a newer iteration now. The M404 I seem to recall we initially had some trouble with the devices not waking from sleep, but a few driver changes and that seems to be resolved. I personally wouldn't even consider consumer grade inkjets, yes they're cheap, but they're only going to cause you trouble further down the line. Cheap in purchase cost, expensive in maintenance time.

We set auto download and schedule the install, and specify a deadline in GP. This forces the updates to install in the background during normal use, within a few days of becoming available. We've then got the automatic reboots turned off, with active hours set 7am-7pm. Then finally we've got reboot notifications turned off, just on the laptop trolley OU. In this way, the laptops take their updates in the background during business hours, but don't bug the user for a reboot, as the device will be shutdown and restarted in the normal course of events (we don't use sleep or hibernate, closing the laptop lid will cause a full shutdown). I know some people prefer to wake devices from sleep during a maintenance window, but always felt like too much faff for me, and I've never been a fan of sleep or hibernate. I've not had any complaints about Windows update slowing down start ups, as most of it happens during shutdown, and our laptops are usually up to date in WSUS.

We had to put a policy in place to prevent staff using their phones to take pictures in the classroom, and that any picture had to be taken on a school issued device. To then try and say staff shouldn't be using a school-issued mobile phone seems a bit strong. As long as you've got AUP in place, policies that state that devices can and will be searched/monitored, and the devices enrolled in an MDM, I'm not sure what more you can be asked to do. Beyond perhaps a safeguarding monitoring system client installed, and I don't know if those even exist. I'm sure you've got a good business case for using the issued mobile phones, so I would note their concern, but put it down as an acceptable risk. Maybe you can do a risk assessment from a safeguarding perspective and get it signed by SLT to say that you note the risks and here's how you've mitigated them. Or a DPIA from a data protection angle, perhaps.

Most imaging solutions will require you do either a network boot, or boot into some kind of boot image, before applying a new system image. Applying a new system image is the same as reinstalling Windows from scratch. Anything installed on, or saved on, the pre-existing Windows installation will be wiped. If you've got the software automated to reinstall (eg via Group Policy or SCCM/InTune) then it will reinstall, otherwise it's a manual reinstall of that software. I am not aware of a way of taking a clean system image and using it to "upgrade" existing installations, although others may know of a way.

I've had the same with Amazon Basics, I've replaced some of our trunked cabling with Amazon Basics HDMI with great success. I was as surprised as anyone that these were the more reliable!

Not with the Lenovo 100e, but, we've had that failure a lot with the Lenovo 300e 2nd Gen MTK - Thread on this here. Having said that, we've had very few failures with a later batch of 300e which are 2nd Gen AMD, so I'm blaming the MTK (Mediatek) chipsets.

That's right, although the install process should be pretty much the same - yours will be installing Creative Cloud + Acrobat, mine just does Creative Cloud. Either way, it should just be a case of getting that installer to run. Best of luck!

That's a weird one. If it's the MSI version, you should be able to look in Event viewer under Applications to see what errors it's kicked out. Alternatively, you could run it without the /q and see in real time what errors it hits. We're not doing ours through InTune, we're doing it by startup script, but we are calling the MSI to install it. Our command line below. msiexec /i "Creative Cloud Desktop App 5.8.0.msi" MSIRESTARTMANAGERCONTROL=Disable /qn

Yup, it's all run from a client. I suppose you *could* run it on a server if you needed to, but it shouldn't be necessary. The theory being, with Minecraft Education, your class teacher would spin up a server, children connect, and then it's shut down at the end of the lesson.

We use a Hyper-V SET on our Server 2022 box, and we've not done any extra config on the switch end, it's all managed by the OS.

You've got "setup.exe --silent" as your install command, but I don't see a setup.exe in the root of the package folder? If you've created that in Adobe CC packager, I think it's the MSI setup you need to call.

I wouldn't like to say definitively, but, we were in a similar situation, and another 3 year OVS + a few extras was cheapest for us. We looked at M365 A3, and that would have worked well if we'd gone completely serverless, but add on licensing the servers separately, and it was more expensive. Microsoft EES - we didn't look at this route. Yes these have gone down from 1000+ users to 100+ as a minimum for entry, ask your reseller if this might be an option. Link here for differences between EES and OVS - https://download.microsoft.com/download/3/9/0/39090891-52ff-46ec-aa21-57bbe61981aa/Volume_Licensing_Comparison_Academic_and_Partner.pdf

IIRC, as long as you buy machines with a Windows Pro (I think) license, then if you have a Windows product in your OVS subscription, that entitles you to an Edu/Ent upgrade. I think that might be what "Windows Edu Per Device 11 Education" on your agreement might be, but don't quote me on that. Anything on there with 60 is probably your Full Time Equivalent (FTE) licensed product under the OVS agreement. Your FTE products allow you to use that item on as many devices as necessary across your school for the use of 60 FTE teachers (kids go free). I'm not sure about the perpetual licenses, we don't currently have any. But my guess is everything you see there is an annual subscription through OVS. If you don't have any existing perpetual licensing, then buying your licensing outright (especially the servers) will be quite pricey. We recently renewed our licensing, from a not dissimilar position to yourselves, and ended up getting a new OVS, plus a few sundry other items separately. Your best bet is to talk it out with a licensing reseller though, Microsoft licensing is labyrinthian at the best of times.

OVS agreements should be still available, we started a new one just this month. Do you actually own your licensing outright, or do you just have the licenses which came with the machines? If you were using the OVS agreement, it's likely you were using that as a "top up" for certain things.

If you're using extended desktop, my understanding is that this is using two monitors as one big monitor. I don't think there is a way to remotely control an application from one side of your desktop to the other. It sounds like you're either looking at running that app blind, or, using duplicate displays instead. That said, it does depend on the application. What are you using on the blind screen? It may be that there is a secondary way to control that. Eg, an Intranet page could be displayed in a web browser, but you could be looking at the backend in a different program at the same time.

IIRC, when you rebuild a workstation, the workstation will need to redo the hybrid domain join. It may not do this immediately, it might take a short while. Although I must admit in my experience, it's always been ready in time for first login. If you run the PC for a few hours, do you see an update on the machine account in Azure? You can force the hybrid domain join by running a task from Task Scheduler - Go to Task Scheduler Library > Microsoft > Windows > Workplace Join and manually start the task “Automatic-Device-Join“. If you still can't get SSO to work after running that task, it would suggest to me that hybrid join is failing for some reason.