just_david

I don't want these bits running every time though, I just want them to run once then not run again.

We're getting a lot of group policy errors in our event logs when computers boot up and gpupdate, an example being: The computer 'Video Player.lnk' preference item in the 'Client: Added Removed Shortcuts {AEC5820E-90B1-440B-A30D-85F355121111}' Group Policy object did not apply because it failed with error code '0x80070002 The system cannot find the file specified.' This error was suppressed. We have a group policy that deletes that shortcut on every PC. Now it was running every time a computer updates or starts so the error was more or less expected. But now I'm trying to stop so many errors, but hitting a bit of a brick wall. My first though was to set the group policy to run once - I do want to delete the file on all machines so i don't want to disable the policy altogether. However the same errors still occur every time the computers start and update Should that be happening or am i misunderstanding how the run once and do not reapply setting works?

Depends if i capture enough year 7's for the blood sacrifice. Either they're getting faster or I'm getting slower

I swear teachers just think everything happens by magic over the summer ^^

just 6 more hours till the busiest time of the year starts The amount of conversation starting with "why didn't you ask for this sooner" being finished with the line "because they only just told us" would be amusing if it wasn't my manager having them. Man I'm glad I booked my time off in advance >.<

Praise be unto GabeN and the holy symbol never to be mentioned, is greater than 2 but less than 4 Steam ID Aelshar - which translates roughly as "this sounded badass when i was 18"

sold sold sold!

All these projectors were removed from classrooms and some will need more love than others befor they could go back in. Some might require just a bulb, some might require a more intensive refurb, some just might need a dust off. in box 1 we have: projectors: NEC Np300 x3 NEC NP310 x3 NEC Np305 x2 remotes: NEC Rd-427e x5 NEC Rd-445e x3 And in box 2 we have: Benq MP 620p x5 BenQ MP 721c x1 Infocus IN2104EP x3 NEC VT575 x2 Epson EMP-S52 HP VP-6120 x1 and remotes: Infocus HW-Navigator-2 x2 Infocus HW-Navigator03 x1 Benq x6 NEC Rd-412E HPL1628A x1 Epson x1 We're after £400 the lot Chew Valley area near Bristol We'll either invoice or use BACS

Hi Folks Freebies this time, collection only. We have refurbed/remanufactured toners for HP laserjet 2605's, 2100/2200's and 2410's. For the 2605 we have: 5 Cyan, 5 Yellow and 5 magenta with 2 black we have 3 for a 2100 and 2200 and 3 for the 2100 only and for the 2410/20/30 we have 3 Collection only from Chew Valley Again PM me offers or for more details

Sorry forgot the price, looking for £10 min at the moment

Soon to be available we'll have around 25 HP dc 7800/7900 models. Intel core 2 processors and 4gb of ram with 100gb+ hard drives, but no OS No monitors, keyboards or mice. They'll be available from the end of this month onwards, in the Chew Valley near Bristol. Looking for £10 + per unit PM me with offers double edit: We'd be invoicing or taking payment Via BACS

Hi Folks, For your browsing pleasure today we have for you an unused 48" smarttech smartboard. Bought I don't know when ago it was the wrong size and for some reason never returned. It's the usb model SB640R2 We no longer have the box and we don't have the pens but do have a pen tray. We're in the Chew Valley just outside of Bristol Looking for £200+ at the moment PM me if you're interested extra edit: We'd be invoicing or taking payment Via BACS

Good enough that hearing you mention it made my heart sink. I can modify existing scripts and do basic troubleshooting is about all.

So I've been given an excel spreadsheet to import into Outlook. The problem is the format is all wrong. I need to convert it from: [TABLE=width: 1391] [TR] [TD]Day[/TD] [TD]Mth[/TD] [TD]Date[/TD] [TD]Wk[/TD] [TD]Mtg[/TD] [TD]Ass[/TD] [TD]General[/TD] [TD]Y7[/TD] [TD]Y8[/TD] [TD]Y9[/TD] [TD]Y10[/TD] [TD]Y11[/TD] [TD]Y12[/TD] [TD]Y13[/TD] [TD]Govs/SSOC[/TD] [/TR] [TR] [TD]Tues[/TD] [TD]Sep[/TD] [TD=align: right]1[/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD]INSET Day[/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [/TR] [TR] [TD]Weds[/TD] [TD]Sep[/TD] [TD=align: right]2[/TD] [TD]A[/TD] [TD]SLT[/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [/TR] [TR] [TD]Thurs[/TD] [TD]Sep[/TD] [TD=align: right]3[/TD] [TD]A[/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD]Enrichment Taster Session 4-6pm[/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD] [/TD] [TD]Year 12 start[/TD] [TD] [/TD] [TD] [/TD] [/TR] [/TABLE] into [TABLE=width: 128] [TR] [TD=class: xl63, width: 64]Inset Day[/TD] [TD=width: 64, align: right]10915[/TD] [/TR] [TR] [TD=class: xl63]SLT[/TD] [TD=align: right]20915[/TD] [/TR] [TR] [TD=class: xl63]Enrichement Taster Session[/TD] [TD=align: right]30915[/TD] [/TR] [TR] [TD=class: xl63]Y12 Start[/TD] [TD=align: right]30915 [/TD] [/TR] [/TABLE] Every non blank cell from the fifth column onwards needs to get a new entry on a new row with the date calculated from the first 3 columns And make a template file so this can be done often. Then converted to a csv file

With both. It appeared in OWA befor the desktop client, and still isn't in the desktop client address list, but doesn't throw an error if we put it in anymore.

Hmmm no, the group in question doesn't have a proxy attribute set, nor will it let me set one. I'll poke it some more and report back Edit: speak of the devil, after about the fifth run of the sync today it's picked the group up and is now emailable

Doesn't appear to be no. We've added an email, run a sync, but still when we try to email it comes up as an un-emailable address

Does anyone know if this is possible with exchange 365? We've tried every option we can think of but we just can't seem to have a security group that's also an email group. I've seen mention of a trick that can be done in dir sync, but no specifics

Does anyone know if there's a GPO to stop this message popping up? I thought I'd found it in the word 2013 'prompt user if word isn't the default application for file extensions' GPO, But I set it to enabled (which according to the descriptive text disables that option in word) and it still pops up every time.

That's brilliant I'll test that out this afternoon with a few computers. thanks for the help everyone

I know that's why its slow, what I'm trying to find is a way to avoid having to do that but how will that cope with users logging in in different locations that have different printers? We don't want users to end up with 20 odd printers on their account I thought about using the GPP to target computers instead of users, but assumed there was a reason why this hadn't already been done. Does anything have to change for that or is it as it seems?

Chaning replace to update wouldn't change anything as the first thing to run is the delete all command. We already have OU's set up for the targeting of the printers.

Hi, Does anyone have any advice for deploying printers? Currently applying printer preferences is our longest hang time when a user logs in, and we're looking for a way to speed this up if at all possible. Our printers are deployed via GP using security groups for targeting, using a user configuration to deploy the drivers. On order 1 we have a delete all so that users don't have a printer from the other end of the school mounted by mistake, then the rest of the printers are added. Is there a more elegant way to achieve this? I'd love to find a way to get the right printers mounted on the right machines without having to uninstall and re-install them every time a user logs in. Thanks David

Has anyone here ever used the ruleset.xml file for java? We want to whitelist a pair of java web apps/websites and from what I can tell this is the best way to do it. Thus far I have a file with: But now I think I have to get this signed and made into a jar file. Is that the case or is there another way? Is there a guide on how to do that, or am I taking an overly long winder approach to this?

I was going to start a new thread, but this here looks promising, as I'm after the same/similar thing but... What would you recommend for some network and switch configuration training? It's something I want to cover and something our department is lacking. But the only qualification I can find is the CCNA, and we use precisely 0 pieces cisco kit ^^