Simcfc73

It downloads the update and extracts it, then the error pops up with the 3004 error. I might take it home and make sure its not SW that's blocking the update

It wont let me wipe in iTunes, I get the 3004 error when I try it.

Hi, Bit of a problem, I have been using Meraki MDM with the iPads we have in school but a perfect storm has happened where a passcode has been added and the wifi is not on so I cant use Meraki to clear the passcode. I have booted into recovery mode to wipe it but am getting a 3004 error when I try and restore it.. it doesn't allow me to just restore it, it always asks to update and restore. Anyone got any advise on how to get into it? Tempted to JB it which I think I had to do to sort a forgotten iCloud issue.

Actually my windows phone flies after it logs on... must be a android thing.

Sort of getting there. I wanted to make it simpler with my existing VLANs so opened up more than I should on my test site. It seems to ignore the redirect and take me to http://myruckuscontroller/user/index.jsp@url=connectivitycheck.android.com/generate_204 If I tick the 'tunnel vlan to controller' in the WLAN it gets there but its painfully slow. (slightly quicker on my W8 phone) the tablet is taking over a minute. I need to do some more fiddling, it flies to the Ruckus logon page when it eventually loads up and allows me to logon... I can see the authentication in the SW logs but I cant get to any pages... think its a DNS issue.

My biggest issue is I've never got my head round VLAN routing. So currently no VLANS talk to each other. My main VLAN is 1 I have a junior/Chromebook VLAN 15 BYOD and Staff on VLAN 30 30 and 15 get their IPs from SW DHCP So the config falls down because they cant get to the ruckus controller page on the VLANS.. its been on my to do list for years now. Did try and budget to get a PRO in to help setup and show me how but haven't had the time.

The save doesn't work on mine, seems to list all of them and miss ones I already have,.

Might have a play with this then, mine is setup so when they attach to the WIFI they are prompted for a username and password in the WIFI connection, they don't see a SW login box or a Ruckus box. I wanted to change this as my idea was that the MITM cert could be displayed on the SW login page for them to download. SW told me how to do it but I haven't got round to it yet.

Just looking at my logs and there are loads of Radius logons so its working, I think there was a couple of issues with keychains too. There is a article on the SW site about having to manually create a connection to radius if your using windows 7 which I couldn't get working, if I manually connected to the BYOD and tried logging in that's when I got a log on the SW with the string of characters instead of the username. I think it sais they are working on a better log viewer so its easier to work out what's wrong.

I've got this up and running too but there is issues so I might dump it. Its a bit hit and miss and one thing that seems to pop up is sometimes the logs show the radius logon as a string of numbers (or the mac address).. and the faff of getting windows 7 to play nicely is a pain too.

Just came in this morning after a week off on paternity and one of the laptops is dead from Stone. Fingers crossed.

Loved Tom Baker, hated Tennant. Would like Ibris Elba to be the next doctor.. and the next bond. although I hated the last bind film and I was alone in that.

Cannot seem to use assigned apps to make a kiosk logon for IE or Edge.... I have tried a different browser but its very buggy.

Shane really, I have a decision to make now whether to switch over. It does seem a nicer way to log on but I like the ruckus logon page. Had a couple of issues when testing with my windows phone too where it wouldn't connect so I had to reboot. Suppose we have to just rely on staff and students to not use the wrong one.... Might as well just have one SSID.

I have got this working but are roles supposed to work with the SW radius facility? If I take the WLAN for my radius out of the default group it stops working altogether. The groups are set ok as they work when I just use the portal page and it fills the users groups in properly.

Morning, I've read lots of articles on here about this subject but there seems to have been alot of updates recently so I am struggling. Can someone check i am doing this right. Ruckus - I have setup a WLAN with authentication as open > Captive portal as Radius - Smoothwall and in advanced smoothwall accounting. In the AAA a radius pointing to the Smoothwall with a simple shared key > PAP as the auth and everything else set to default and a Radius accounting doing the same Smoothwall - In the BYOD section I added the ruckus controllers IP address in the Authorized RADIUS clients bit and the same for the Forward RADIUS accounting to. I am testing this with a simple shared secret. In the authentication polieic I added a simple transparent proxy rule for everywhere Core authentication as the top rule.I get the Ruckus logon page when I connect to the WIFI I setup but it doesn't authenticate. I look in the Smoothwall log and I can see it says RADIUS authentication failed; username: stafftest, access point: 192.168.100.180 I am missing something very obvious so please can someone point me in the right direction. I want to set this basic one up then start playing with the VLAN stuff. Much appreciated.

I tried an upgrade on my laptop which completely ruined the machine, couldn't repair it or roll back so ended up having to do a fresh install which *touch wood* is working fine. Using the same media I decided to try one PC in the staff room to play with. It allows me to select the hard drive and then does the Hi stuff (which they stole from Apple FFS) and asks about changing the options...then says they will be back soon... then does the same thing (I did remove the media) and gets to a lovely screen saying something went wrong and it cant sign in... it wants me to create an account for this PC which it wont allow as it always says 'something went wrong' underneath the password hint. I have tried every combination I can and started again from scratch but hitting this wall. Any ideas? I may try a USB install just in case it doesn't like the media. - - - Updated - - - PS the only thing I found on the internet was removing the battery on a laptop install which was on a earlier build.. this is the W10 EDU ISO

I remember my Kona NuNu, bright red... loved that bike, did hundreds of miles on it. My current Kona is sat in my moms garage, 20+mile commute is a bit far for me now.

Many thanks, really house I can use it with no remote.

I have all these cables, the last bit shows a USB being plugged in and going to the right, doesn't show how the SB is connected to it though.

Hi, Due to us being super skint I took a punt on a projector and SB off Ebay. The Smartboard seems to work fine with no dead spots but the light and the buttons on the projector don't work... there was also a 3rd party remote control which doesn 't respond. I am used to using normal projectors and not used to this model....it comes with the leads to switch it on and off which works fine and it comes on with that. Problem is I am not sure how to wire it up... when I switch it on it says no smartboard is attached...which goes away if I connect to the usb on the right but then where do you connect your computer to??? Also, can the settings be changed from the network or I that just for connecting to a remote PC? I can use the SB to change the settings using the touch screen but its limited... Its 99% working and don't want to send it back if its almost right.

Hi, We are looking at this for our school but a bit unsure, primarily as it seems great for tablet but we don't have them. I like the idea of it saving passwords for multiple sites, and I suppose we could use it with our chromebooks but mostly interested in the remote file access. I have been using HAP for a while now which is great but need something which integrates and is easy for me to administer.

I've watched the first two, its....fine... very clichéd though. Under the Dome came back last night and seems to have run out of ideas, daft And then there is Shamamalayan and his Wayward Pines, he is still living off 'I see dead people'

So no Spock... I'm out!!

Nope, says incompatible. The mac mini was a early core 2 duo so wasn't supported on it. I managed to get a DMG and install from a USB.. just updating to Maverick now. Fans running constantly but the case isn't on right yet and I managed to move the magnets that hold the screen in place around