timbo343 Posted July 17, 2007 Posted July 17, 2007 We have just taken delivery of 100 NECs, and they have put the Win Product Key on top of the case, One slight problem... kids might pull them off. What do other people do to stop this happening and would taking a photo be ok if the kids pull the stickers off as proof.
StewartKnight Posted July 17, 2007 Posted July 17, 2007 I always take them off now, and keep them in the safe!
mrforgetful Posted July 17, 2007 Posted July 17, 2007 We've never had much trouble to be honest, I'd have thought some would take the initiative to write down a key to use at home (seen as we use our VLK they'd have no problems) but they never seem to have done. I think if you have all your paperwork in order then if the odd PC had no sticker you'd be fine.
Guest Guest Posted July 17, 2007 Posted July 17, 2007 We've never had much trouble to be honest, I'd have thought some would take the initiative to write down a key to use at home (seen as we use our VLK they'd have no problems) but they never seem to have done. I think if you have all your paperwork in order then if the odd PC had no sticker you'd be fine. Thats how i see it. You pay for the licence to use the software, not the specific serial. Hell if we all had to go round and edit the keys on every PC we've used RIS/WDS/ghost images on we'd never get anything done!
plexer Posted July 17, 2007 Posted July 17, 2007 I think you'll find that if you buy a machine with an oem xp pro licence on and then use a vlk that you've acquired to reinstall you could well indeed be on the wrong end of the Microsoft stick. Ben
john Posted July 20, 2007 Posted July 20, 2007 No you can use your VLK media to re-install XP OEM I was told that was fine, just so long as I can prove that I own the XP Pro OEM I am fine. As for those that remove the OEM stickers themselves before the kids do like mine do IE rip them to bit, how on earth do you get them off? They normally shatter and break for me, so please advise.
timbo343 Posted July 21, 2007 Author Posted July 21, 2007 ive moved a few my self from machines that we have scrapped, you have to have real patience and take it really slowly. Where the labels have little slits in them start un-pealing them there too... buy yeah just take it really slowly.
ChrisH Posted July 21, 2007 Posted July 21, 2007 Im told you need to use a heat gun to get them off easily in one piece ....
webman Posted July 21, 2007 Posted July 21, 2007 Easier to steam them off with an Iron. Oh no... you mentioned the I word.... 8)
Joedetic Posted July 21, 2007 Posted July 21, 2007 When we closed the old ICT suites that our school started out with and moved over to the new eLearning centre, i know of two people (students) that went round writing down all the codes on the RM machines. I've been told that none of the keys worked anyway (i think they must have been using corporate or home or something that the keys dont work on). As for ironing...there's no such word. There's only TONNES of softner.
john Posted July 21, 2007 Posted July 21, 2007 hehe, comfort and the washer on Easy Iron mode Anyway, you cannot really steam the new ones can you as they are entirly paper as its so you can feel the fibres and see them, so surely they get a bit soggy with steaming them? Maybe I will try on one of my machines, I have an iron in the office somewhere from reattaching some mellamine edging strip to the desks in the IT Centre...
thom Posted July 23, 2007 Posted July 23, 2007 I was concerned about this and I asked my system builder (HP Direct) if they could leave them off or stick them on the inside of the case. HP looked into it and said that it is a legal requirement for OEM vendors to put the sticker in a visible place on the case. In the end we got them to stick the underside of the case so at least students have to lift them up to see it is there The following is from Microsoft UK Education Licensing Site http://www.microsoft.com/uk/education/buy/compliance/faq.mspx Q: What happens if my Certificate of Authorisation (COA) is damaged or has to be replaced? A: You will need to go back to your reseller/manufacturer or the place where you bought your PC and request a new COA. You will then need to peel off the old COA from your PC (even if it is in pieces) because it will need to be sent back to Microsoft before the replacement can be ordered. The replacement COA will then be sent back to the reseller/manufacturer or place of purchase, who will then stick it back on the chassis of your PC. It also says that proof of license needs the invoice, EULA (if a hard copy was sent) and the COA (that's the sticker). So it's nice that Microsoft have made this as easy as possible for educational Establishments
john Posted July 23, 2007 Posted July 23, 2007 When I build them I stick them on the rear or base so they are still visible but not as prone to children picking at them.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now