Paul_L Posted July 13, 2007 Posted July 13, 2007 Just a general question! Has anyone tried getting out of warranty projectors repaired? If so where and how much! I guess it may be important to the topic the projector I'm looking to get repaired is an Hitachi. Not wishing to overload this thread, but what are peoples veiws on repair, is it cost effective? Paul
webman Posted July 13, 2007 Posted July 13, 2007 What's wrong with it/them? Do you have an IT Service Level Agreement with your LEA?
bigjb Posted July 13, 2007 Posted July 13, 2007 Try Roche Audio Visual always been pretty good repairing stuff for us: http://www.rocheav.co.uk/index.html
Paul_L Posted July 13, 2007 Author Posted July 13, 2007 What's wrong with it/them? Do you have an IT Service Level Agreement with your LEA? It's blowing the ring main circuit breaker and no we have no SLA with the LEA for such things
plexer Posted July 13, 2007 Posted July 13, 2007 If the problem is caused by an inherent fault of the projector then you have up to 5/6 years under the sale of goods act to claim against the company that supplied it to you. Ben
Andrew_C Posted July 13, 2007 Posted July 13, 2007 It's blowing the ring main circuit breaker OWW! Have you tried a different mains lead? If you have, it is probably the filter capacitor that has failed, which should be economical to repair. @plexer Are you sure? Sale of Goods act is a consumer protection. We aren't consumers.
Paul_L Posted July 13, 2007 Author Posted July 13, 2007 OWW! Have you tried a different mains lead? Yes have tired that and all other ideas, it is most definitely the projector
sparkeh Posted July 13, 2007 Posted July 13, 2007 Try Roche Audio Visual always been pretty good repairing stuff for us: http://www.rocheav.co.uk/index.html Not doubting your experience here at all but I have had some shoddy experiences with them myself. We have some equipment in warranty with them and their service has been less than impressive. Apart from the warranty stuff I won't deal with them again.
john Posted July 15, 2007 Posted July 15, 2007 I find it cheaper to bin the blasted thing and get a new one, everyone thats gone faulty has always been quoted at over £300 to repair, I can get a new projector with 3 year warranty and spare bulb for just over that.
Paul_L Posted July 16, 2007 Author Posted July 16, 2007 I find it cheaper to bin the blasted thing and get a new one, everyone thats gone faulty has always been quoted at over £300 to repair, I can get a new projector with 3 year warranty and spare bulb for just over that. This to be honset was the reply I was expecting, anyone else agree with John?
sparkeh Posted July 16, 2007 Posted July 16, 2007 This to be honset was the reply I was expecting, anyone else agree with John? Sure do (meant to say this in my post above ) I don't bother with projector repairs. The last batch I bought had a three year unlimited bulb warranty, when thats up I'll get another batch.
john Posted July 20, 2007 Posted July 20, 2007 http://www.dabs4work.com/ProductView.aspx?Quicklinx=4LJQ I have had about 5 of these recently, ranging in cost from £339 to the latest of £299, all when used in 1500 ansi-lumens mode (normal / low mode) have a 3 year unlimited hr bulb warranty, if used in high its only 90 days - it has a counter for each mode so you are warned! But 3 year projector and 3 year bulb you cannot go wrong, when the thing dies after the 3 years, bin it and get a new one as the bulbs nearly the cost of the projector.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now