TheMan100 Posted July 20, 2011 Posted July 20, 2011 Hi everybody, I'm looking in to self-teaching my self the CCNA and then sit the exam. I've got my eyes on these two books, ICND1: CCENT/CCNA ICND1 Official Exam Certification Guide CCENT Exam 640-822 and CCNA Exam 640-802: Amazon.co.uk: Wendell Odom: Books ICND2: CCNA ICND2 Official Exam Certification Guide CCNA Exams 640-816 and 640-802: Amazon.co.uk: Wendell Odom: Books (Both are from the same author). However, if I buy these books I want to get a hands on approach with the gear, rather than emulating the hardware. Can anybody suggest some cheap cisco hardware that I'll find useful when self-teaching myself CCNA, or do you have some old stuff you think may come in handy for me which you no longer require (I'd be willing to pay, but not too much). Also, if you can think of any other decent books, then please suggest them to me. Thanks.
ChrisH Posted July 20, 2011 Posted July 20, 2011 You can buy kits of Ebay or if you know what you want, buy it individually. I was patient and picked up a few switches and routers cheap. CertForums - The Certification Community has good advice on this and you will find some posts regarding what you would need ideally as well as recommendations of Ebay sellers.
featured_spectre Posted July 20, 2011 Posted July 20, 2011 Nothing wrong with the virtual software from Cisco, infact it is quite useful for breaking and rebuilding switches, routers etc. Packet Tracer is awesome, and much more fun IMO than proper equipment.
jtotheb Posted July 21, 2011 Posted July 21, 2011 (edited) Cisco items - Get great deals on Cisco lab, CCNA items on eBay Stores! sell everything you could want for a home lab. It will start getting expensive fairly quickly though as you'll probably want at least 2 routers and 2 switches, so you'll be looking at the thicker end of £200 at a minimum once you've added in cables and everything. Also if you haven't got a rack in an isolated area it gets noisy as well. If you just want one device to get actual hands on you're looking at ~£50. The very cheap switches may not have all the features you need to practice with so 2950s would probably be as low spec wise as you'd want to go. If Packet Tracer is on one of the CDs that came with the book then I'd certainly be using that to begin with. Edit: Actually you may have to get one of the official Cisco Academy books to get hold of Packet Tracer on CD http://www.amazon.co.uk/dp/1587132087 as technically it's only available to Cisco Academy students. Edited July 21, 2011 by jtotheb
p3dr0 Posted July 21, 2011 Posted July 21, 2011 if you decide to go virtual use gns3 as packet tracer is limited and some of the commands does not work.. where gns3 is a real router simulator. You can also rent a rack with real equipment it costs about £ 10 a day and you don’t need any more books just some lab guides and you could get some video training as well
Diello Posted July 21, 2011 Posted July 21, 2011 I'd recommend Triiton Networks on eBay - Take a look at Triiton Networks items - Get great deals on Cisco PIX-515E-UR-BUN Firewall PIX-VAC 515 515E PIX - items on eBay Stores!
TheMan100 Posted July 21, 2011 Author Posted July 21, 2011 Ok guys, thanks for the replies. I think I might get a couple of 2950s to start with, and then build it up from there. As for noise... well... I'm sure I could find somewhere to put them. Also, just to check... I would need to get an RJ45 --> DB9 connector in order to configure it?
ChrisH Posted July 21, 2011 Posted July 21, 2011 Yes you need the special console cable. Have a good look around as well as I'm sure I managed to get my switches for about £20 or less, you just got to watch a about 10 promising auctions at a time.
TheMan100 Posted July 21, 2011 Author Posted July 21, 2011 Oh nice... what switches did you buy? Also, were they substantial enough for you to fully practice the CCNA on.
cpjitservices Posted July 21, 2011 Posted July 21, 2011 OK some advice whilst Packet Tracer is GOOD, a lot of the more "Advanced" commands are missing so I wouldnt recommend it for all of your lab use, lab it up on real kit and get yourself on the CBT NUggets website and look at the CCNA stuff, also grab GNS 3 from the net and install it - aslong as you have IOS's you can run live Cisco Router Images on your PC and break it and learn on it as much as you want but you cant beat the real kit, grab some routers and some switches not just one of each - with several bits of hardware you'll see everything working and talking to each other logically, you'll see all the protocols working and you'll be able to see everything working on something like Wireshark - Always use more than one bit of each kit it's always better to see it working. Also when you learn always learn the full command strings dont use the shortcut commands like for saving the config on the hardware you can use the command "wr" this is fine in the real world but for exam purposes you'll need to use - Copy Running-config startup-config. Remember that for the exam. And also a little tip, build you lab and learn and once you've learned how everything works - follow the Cisco Lab guides and lab it up and then - get someone in to break it for you and see if you can fix the problems - it's good for gaining great troubleshooting skills. Good Luck!
cpjitservices Posted July 21, 2011 Posted July 21, 2011 The best switches for CCNA are the 2950's and the 3550 series switches, routers I'd Recommend for CCNA the 26 and 2800 routers. I'd go to eBay and grab x2 Switches and x2 Routers - and the corresponding cables. It's also interesting if you could setup yourself a server/workstation and setup SNMP traps and setup something like Nagios.
cpjitservices Posted July 21, 2011 Posted July 21, 2011 As for noise, I often find I can mellow out to the sound of whirring fans from my servers switches and routers - it's just sooooo mellowing - oh wait it might just be me - at least if it's whirring it's working lol
Jamo Posted July 21, 2011 Posted July 21, 2011 Packet tracer is pretty much all you need for the CCNA, (hardware wise) although the real thing does get you the hands on experience which cannot be emulated in software. All the commands you require will be available in packet tracer, its surprisingly good. I did my course through the OU which atm is around 700 quid or something for 4 day schools etc, (have to pay for the exam at the end too) but its rather good. Basically following the Cisco netacad path.
cpjitservices Posted July 21, 2011 Posted July 21, 2011 Yes I agree - Packet Tracer is good just don't rely on it too much - real kit is your best friend.
TheMan100 Posted July 21, 2011 Author Posted July 21, 2011 Thanks for the help guys, but I think I'll definitely invest in 'actual' hardware, as I think it'll help in the long run.
cpjitservices Posted July 21, 2011 Posted July 21, 2011 Good Man, also check out packet life for any bits of kit your missing - it'll help until you can get hold of actual kit - just book your time in and away you go it's free and it's all running Live Cisco Hardware. Community Lab - Packet Life 1
Bud180 Posted July 25, 2011 Posted July 25, 2011 A great book i used when i was in Cisco Academy was Todd Lammle CCNA book. Brilliant book. Lent it to someone and not seen it for a year!!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now