HMCTech Posted March 28, 2011 Posted March 28, 2011 I managed to powerwash my U & S from my focus . Glued the U back together so now I need to stick it back to the car. Has anyone done this before and can recommend some good double sided foam pads to use as I dont want to use flimsey sellotape ones that will come off the next time it rains.
2097 Posted March 28, 2011 Posted March 28, 2011 I managed to powerwash my U & S from my focus . Glued the U back together so now I need to stick it back to the car. Has anyone done this before and can recommend some good double sided foam pads to use as I dont want to use flimsey sellotape ones that will come off the next time it rains. Id probally use silcone sealant ?
Dos_Box Posted March 28, 2011 Posted March 28, 2011 I had a similar problem quite a few years back and got one of these: Halfords | Halfords Adhesive Pad, Heavy Duty Just be prepared to write off a pair of scissors cutting it though as it was VERY sticky. 1
featured_spectre Posted March 28, 2011 Posted March 28, 2011 Epoxy Resin will make it stick nicely if you do both sides of the foam pad with it!
HMCTech Posted March 28, 2011 Author Posted March 28, 2011 I had a similar problem quite a few years back and got one of these: Halfords | Halfords Adhesive Pad, Heavy Duty Just be prepared to write off a pair of scissors cutting it though as it was VERY sticky. Looks like the one to try as I dont want to but anything on the paintwork. Thanks
FN-GM Posted March 28, 2011 Posted March 28, 2011 someone little delight from work stole a letter of the badge on my car. I found a replacement on eBay for less than £10 but not applied it yet.
3s-gtech Posted March 28, 2011 Posted March 28, 2011 Did this with the MR2, and a previous Audi - just used sticky trim tape from Halfords. You cut it to length, and can cut it to shape so it doesn't show behind the letters. Made by 3M I think - still on there 2 years later after rain and shine.
Sirbendy Posted March 28, 2011 Posted March 28, 2011 FORD FOCUS BADGE ESCORT FIESTA RS COSWORTH ETC on eBay (end time 20-Apr-11 10:52:43 BST) Stuff individual letters, new badge!
EduTech Posted March 28, 2011 Posted March 28, 2011 Just De-Badge it (well just the letters, be foolish to take of the logo's ) LOL
plexer Posted March 28, 2011 Posted March 28, 2011 I'd be tempted to go for an outdoor grade silicone as well. Ben
Sirbendy Posted March 28, 2011 Posted March 28, 2011 Just De-Badge it (well just the letters, be foolish to take of the logo's ) LOL Did this to my Astra..heh. 1.6? nah. Merely a Vauxhall Astra now. Ditto the "Club" badges, and the "Automatic". Tempted to change the Griffin for either the Holden Lion, or the Opel "strike".
sted Posted March 28, 2011 Posted March 28, 2011 or just buy a full new badge from local ford dealer they are usually <~£5 or try Discount Ford Parts - Genuine Ford Parts at FordPartsUK
HMCTech Posted March 28, 2011 Author Posted March 28, 2011 Seems to be a bit of confusion in here now. I have not lost the badge, two letters came off which I still have I just want to stick the letters back on. Going to halfords later to try the double sided adhesive first and see how that goes.
INeedAUsername Posted March 28, 2011 Posted March 28, 2011 i did this on a fiesta once - went to ford to buy the whole set the lad stuck it on for me; the label already has the sticky side on already. he used some cleaner to clean the area and put back the missing letters i know you dont need to whole label bit either way use some cleaner before you apply any letters back to the car HTH Stariq
rad Posted March 28, 2011 Posted March 28, 2011 just modify the O to take of the top part of it F*C ,you get the idea, (NSFW)
plexer Posted March 28, 2011 Posted March 28, 2011 Sure if he wants to get pulled over all the time by the law and possibly prosecuted too. Ben
Sirbendy Posted March 28, 2011 Posted March 28, 2011 Only if they have nothing else to do. I had "Eat Lead *expletive*" on the boot of one of my past cars (a leaded machine in an era of "that's BAD"..and never got pulled. But then I used to get pulled at random for other things.."your lights are tinted".."yes, I know. I did it.". "well, that's illegal". "No, it's not. Look, they still work.". "oh..". Most plod don't care, some are doughnut munching, tiny minded morons. Like the one who pulled me approaching a 30 zone from a 40 zone in sub zero conditions, because I was doing 35 in the 40, and must therefore be upto something. I did suggest McDonalds may have been shut, vis a vis his spare time to pillock about. He didn't like that much.
Ketlane Posted March 28, 2011 Posted March 28, 2011 Memories of the old days of lack of quality control. Brand new Triumph 2000, the name TRIUMPH spelled out in separate chrome letters fitted to the bonnet - but in the order TRIUMHP.....
witch Posted March 28, 2011 Posted March 28, 2011 (edited) Memories of the old days of lack of quality control. Brand new Triumph 2000, the name TRIUMPH spelled out in separate chrome letters fitted to the bonnet - but in the order TRIUMHP..... Would that be worth extra like a misprinted coin or stamp My daughter's friend, Kat, has a Ford Ka - she went out and bought a letter T and stuck it on - looks great! Edited March 28, 2011 by witch
korifugi Posted March 29, 2011 Posted March 29, 2011 Would that be worth extra like a misprinted coin or stamp My daughter's friend, Kat, has a Ford Ka - she went out and bought a letter T and stuck it on - looks great! I keep thinking of doing this to a friend's VW Bora.... "How's the drive quality?" "It's Nice"
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now