Jump to content

Cubasis - not previewing as you play [FIXED]


Recommended Posts

Posted

It's a while since I've meddled with the black art that is Cubase. We have a problem with a new installation of Cubasis. The soundcards are SB Audigy2 zx's.

 

The keyboard input displays on the meter [the red meter], but you can't hear as your playing [and the green - input meter is dead]. You can hear what you played when you play it back [the green meter flashes away].

 

The soundcard is working correctly I think - it passed a basic duplex test suggested on Creatives website.

 

Any ideas anybody??

Posted

in sound settings has it got roland selected as midi section.

 

Also obvious question check midi cable

 

cable in is in out socket and cable out is in the in socket etc

 

Russ

Posted

Thanks Russ

 

Should it have Roland selected or not?

 

Yeah - the cables are connected to the opposites - got that bit ;)

 

The teacher is a self proclaimed expert in Cubasis - and he can't figure it out - as I say - the hardware passed the test.

Posted

Just a few things ( Although some of them are probably obvious or even stupid suggestions, it wouldnt hurt to check them out ) :

 

1.] Open up the tower case and make sure that the sound card has a power connector hooked to it as these sound cards require power.

 

2.] Make sure all the mixer lines that the keyboard or software uses or needs isnt muted and or make sure that the correct ones are selected.

 

3.] As for whether it is roland or w/e else, try all the options it gives you and see if that helps.

 

4.] Make sure all the cables are firmly seated and connected in the correct holes / ports or whatever you want to call them lol.

 

Also what is the driver situation like ? Maybe you could go to the creative website and update the relevant drivers and possibly the software :)

 

I hope this helps

Posted

Thanks for the input guys [no pun intended! :p lol!]

 

now if only I could test it remotely - onscreen keyboard... hmmm :D

 

Music village [spits!] - we have some of thier PC's - over-priced crap! - they just gave up on Cubasis - not pro s/w [they have a point]. Good idea tho' - I don't think it works on thier PC's either - so the call would be legit! ;)

Posted

You can get Cubase SE3 (think its E) for about £50 each now - we're looking at the different flavours today.

 

Either way, it would be alot better than Cubasis - Cubase SX3 is probably overkill tho (depending on the usage) and SL3 looks a good medium at around £118 p/license.

 

We have one version of SX1 (soon to be upgraded to SX3) and have various older versions of VST 5, 3.7, etc... , and also got given (lol) 4 copies of Cubasis [shrink wrapped - edu versions] - they have got used to them but its like a different program compared to Cubase lol

 

Midi is sooo much easier to use on Cubase than Cubasis.

 

I'll let you know more info later.

 

What are they gonna be using the suite for mark? Does the teacher know how to use Cubasis? (or cubase?)

 

[never got to ask you that lol ur batt died lol]

 

Cheers,

Nathan

Posted

A new teacher has just started Nath who is supposedly an expert. Previously they've used Sibelius for the same task - but he isn't familiar with that.

 

[bTW Sibelius plays out loud as you're recording]

 

We tried selecting all the different drivers in Cubasis > Options > Audio Setup and nothing worked :(

Posted

Expert in Cubase or Cubasis? There is a differnce ;)

 

Cubase does it all fine - and Cubasis *should* do it but they are two worlds apart ;)

 

Can one comment on the various Cubase Sx3 versions about? (not got time to start new thread - am late lol - mark, let me know later)

 

Our teacher uses the scoring part of things, but some say the scoring in the cheaper Cubase Sx (SL, SE) versions is different/not there. Is this true?

 

Cheers

Nath

Posted

Yes - Cubasis expert - not Cubase.

 

Just got hold of Music Villiage who said to click the yellow 'monitor' button on the midi track. Cubasis doesn't have a yellow 'monitor' button!!!

 

Aaargh!

  • 3 months later...
Posted
Just a few things ( Although some of them are probably obvious or even stupid suggestions, it wouldnt hurt to check them out ) :

 

1.] Open up the tower case and make sure that the sound card has a power connector hooked to it as these sound cards require power.

 

2.] Make sure all the mixer lines that the keyboard or software uses or needs isnt muted and or make sure that the correct ones are selected.

 

3.] As for whether it is roland or w/e else, try all the options it gives you and see if that helps.

 

4.] Make sure all the cables are firmly seated and connected in the correct holes / ports or whatever you want to call them lol.

 

Also what is the driver situation like ? Maybe you could go to the creative website and update the relevant drivers and possibly the software :)

 

I hope this helps

 

Its funny how I said " Maybe you could go to the creative website and update the relevant drivers and possibly the software "

 

Anywho , good to hear you got it sorted out :)

Posted
It was just some guy that actually used Cubasis [strange bloke huh!? :)] knew of the fix - and it is actually hosted on some obscure Stienberg site [Canada] - so you could hardly call it a straight forward driver update by any stretch of the imagination I think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...