dsk Posted July 7, 2009 Posted July 7, 2009 Hello! Our Ghost server is down (wont go into details) and im getting bored of waiting for it to be fixed (not allowed to do it myself) so I thought id give FOG a bash. Managed to get it installed. Worked absolutely brilliantly for a Dell mini 10 that we have, so I thought id give it a go on our Vostro 220s. I cant seem to pull the image off though, tells me its a fatal error and it cant find the hard drive. The drive was set to ATA mode, then tried ACHI, still the same. The only other option I have is RAID. Anything else I can do. I tried googling and searching, and i hope i didnt fail epically on that! ta muchly guys!
dsk Posted July 8, 2009 Author Posted July 8, 2009 Just the one. The machines came with vista, but we wiped them and installed XP.
Geoff Posted July 8, 2009 Posted July 8, 2009 A Buggy ACPI implementation by your bios may also be at fault. Try doing an update or also try using 'acpi=off irqpoll' as boot parameters.
dsk Posted July 8, 2009 Author Posted July 8, 2009 heh, youre going to have to tell me where, im a bit of linux n00b Ive checked the BIOS, its the latest one available sadly.
sparkeh Posted July 8, 2009 Posted July 8, 2009 heh, youre going to have to tell me where, im a bit of linux n00b So go to your machine definition in the FOG console and there is an option to add kernel parameters. Try 'acpi=off irqpoll' 1
sparkeh Posted July 8, 2009 Posted July 8, 2009 Hmm the only info I can find on this is on the FOG forum someone reporting that they had to use a different kernel to image this machine. Unfortunately they don't say which one.
Geoff Posted July 8, 2009 Posted July 8, 2009 I'd imagine it's the kitchensink one. To check it's a kernel issue, follow this wiki article. Is PC compatible with FOG kernel - FOGWiki
dsk Posted July 8, 2009 Author Posted July 8, 2009 Ok, so ive tried the fdisk -l command, but it just sits there, so im guessing it wont work. It says I can update the kernal from the WebUI > Other Information > Kernel Updates > but the area, but that area just seems to be empty. I have an active net connection and its all working. Thanks agains guys.
Geoff Posted July 8, 2009 Posted July 8, 2009 Are you behind a proxy? If so, you will have to download and install the kernel update manually.
Geoff Posted July 8, 2009 Posted July 8, 2009 Download the latest 'kitchen sink' kernel Download FOG - A Free Cloning Solution from SourceForge.net extract it to /tftpboot/fog/kernel/ then in the web interface alter the kernel for the machine(s) in question to point to the new kernel image 2
dsk Posted July 8, 2009 Author Posted July 8, 2009 Do i just type in the kernel name as how the file was or do i need to specify a path? Thanks again, sorry Linux nub here!
sparkeh Posted July 8, 2009 Posted July 8, 2009 Just type in the kernel name, FOG looks in /tftpboot/fog/kernel/ for the kernel you specify.
dsk Posted July 8, 2009 Author Posted July 8, 2009 Okay, im possibly being a numpty, ive placed the kernel file into the folder you said, updated it in the FOG console but it says it cant find the kernel.
Geoff Posted July 8, 2009 Posted July 8, 2009 I believe you need to specify the full path to the kernel file relative to the TFTP root in the machines profile in the FOG console. So the 'Host Kernel' section would look like: fog/kernel/Kernel-2.6.29.2.kitchensink Alternatively you might want to replace the default 'bzImage' file with your new kernel. Simply backup the bzImage file and rename your 'kitchensink' kernel to bzImage.
dsk Posted July 8, 2009 Author Posted July 8, 2009 (edited) I just tired the rename of the bzImage funnily enough, but I still get a fatal error about the HDD not being found. Ive also tried specifying /dev/sda, but that doesnt seem to have helped either Edited July 8, 2009 by dsk
sparkeh Posted July 8, 2009 Posted July 8, 2009 I believe you need to specify the full path to the kernel file relative to the TFTP root in the machines profile in the FOG console. Ah yes I was wrong, however its interesting to note reports on the forum that is you just specify the kernel name you get an error like "/tftpboot/fog/kernels/XX (cannot find XX Kernel) I just tired the rename of the bzImage funnily enough, but I still get a fatal error about the HDD not being found. Ive also tried specifying /dev/sda, but that doesnt seem to have helped either What mode is the HD running under, SATA? IDE?
sparkeh Posted July 9, 2009 Posted July 9, 2009 Ive got the drive running in SATA mode. Do you have an option in BIOS to run SATA in compatibility/IDE emulation or anything like that? (seen this called a few different things in different BIOS)
dsk Posted July 9, 2009 Author Posted July 9, 2009 The only options i have are ACHI, RAID and ATA. Ive tried all bar RAID, but to no avail. Thanks for helping!
CyberNerd Posted July 30, 2009 Posted July 30, 2009 So go to your machine definition in the FOG console and there is an option to add kernel parameters. Try 'acpi=off irqpoll' Just as a followup to this thread - we've been having problems imaging machines and getting: Buffer I/O error on device sda, etc. appending irqpoll to the kernel parameters fixed this problem
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now