Popular Post chazzy2501 Posted January 27 Popular Post Posted January 27 (edited) Recently installed a USW Pro Max 16 PoE as the existing POE switch died in a lunch time... Welp the replacement switch a USW Pro Max 16 PoE (great value POE) needs a bracket to fit in a standard rack. Welp the rack mounts are out of stock everywhere! I found some for cheap on ebay and could see they were 3d printed! My time to shine, took 6 hours and printed! and it fits ok, the only trouble was I only had the red/orange in the correct material.. Still better than just fudging it into the cab without a bracket at all! The large box on the right is to house the external psu. (didn't take a photo as my hands were full) Also I will address the patch cables in the summer...(probably not) Edited January 27 by chazzy2501 7
Popular Post 3s-gtech Posted January 27 Popular Post Posted January 27 You're more conscientious than me. That would've been shoved unceremoniously into the black hole of the cab, the door quickly shut and any issues deferred to future me! 3 3
newpersn Posted January 27 Posted January 27 I like - We just brought 2 of these. Are you able to share the design please?
chazzy2501 Posted January 27 Author Posted January 27 2 hours ago, newpersn said: I like - We just brought 2 of these. Are you able to share the design please? this exact one: Unifi usw pro max 16 poe rack mount - Free 3D Print Model - MakerWorld 1
Davit2005 Posted January 27 Posted January 27 7 hours ago, chazzy2501 said: Recently installed a USW Pro Max 16 PoE as the existing POE switch died in a lunch time... Welp the replacement switch a USW Pro Max 16 PoE (great value POE) needs a bracket to fit in a standard rack. Welp the rack mounts are out of stock everywhere! I found some for cheap on ebay and could see they were 3d printed! My time to shine, took 6 hours and printed! and it fits ok, the only trouble was I only had the red/orange in the correct material.. Still better than just fudging it into the cab without a bracket at all! The large box on the right is to house the external psu. (didn't take a photo as my hands were full) Also I will address the patch cables in the summer...(probably not) Love the ingenuity and idea to place a PSU 🙂 How many times i've had to dig around under cables for a PSU or PoE injector is insane, lol.
DalekSec Posted January 27 Posted January 27 Have used the same design, printed in house in an hour with PETG-CF, worked a treat.
.thumb.jpeg.c4b2ea4e027981376480a5ab518033b7.jpeg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now