woz1994 Posted August 10, 2021 Posted August 10, 2021 Hi, Hope i've put this in the right part of the forum. Wasn't sure if it should go under network or virtual machines. I'm in the process of reloading a server and had to move the Virtual servers to another host temporarily. One of the servers was the unifi controller and ever since i've moved it the ap's keep showing as offline and changing to online a few mins later then back to offline (wifi is still working fine, but im unable to do firmware updates etc) All the settings are the same and the ip address of the VM is the same only difference that its on another host. I've had this happen before but can't remember what sorted it. So not sure if its an issue between the ap's and the controller/server or a issue with the VM. Any help would be great. Thanks
FN-GM Posted August 10, 2021 Posted August 10, 2021 Have you tested to see if this is a network connectivity issue? If you continuously ping the controller is anything dropped?
woz1994 Posted August 11, 2021 Author Posted August 11, 2021 Just tried this and nothing is being dropped, i can also ping the AP's that are showing as offline.
FN-GM Posted August 11, 2021 Posted August 11, 2021 Just tried this and nothing is being dropped, i can also ping the AP's that are showing as offline. Are you pinging the AP from the server? Is it a continuous ping?
aicrd Posted August 11, 2021 Posted August 11, 2021 Is this Hyper-V? Any chance the MAC address on the controller VM has changed? That could possibly cause issues, not sure.
AVCTech Posted September 17, 2021 Posted September 17, 2021 Can you SSH into an AP and reset the inform url?
round2it Posted September 17, 2021 Posted September 17, 2021 same vlan? same ip address of the server? mac address of the vm changed?
tosh74 Posted September 17, 2021 Posted September 17, 2021 I had this recently with one of unifi sites (no full list of clients, AP's showing offline or 2.4G/5G disabled. I resolved this by taking a backup of the Unifi folder (stop Unifi Controller service and zip the Ubiquiti UniFi folder). Once complete start the Unifi Controller service again. On the host server sign into Unifi, settings, Maintenance and select Compact Database. Once it's complete check your AP's again I am using Unifi controller 5.6.42 (still have legacy AP's).
TwistedHelixis Posted September 17, 2021 Posted September 17, 2021 I now its probably not the issue but have you tried to disable the firewall on the VM? Is the VM network going through its own NIC or OS shared?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now