Fraserb82 Posted July 30, 2018 Posted July 30, 2018 Hi, After a disastrous time of trying to get Radix to work with Prometheans (could enroll the devices but no commands would send over our network) we have decided to switch to Airwatch. Is there any documentation you can provide on possible limitations with using Airwatch over Radix? Are there any fact sheets stating what sort of things can be set with Airwatch? As an example, enrolled the Promethean and tried to remove an app but we were unable to. But we could push down wifi settings. Thanks Fraser
markiof Posted July 30, 2018 Posted July 30, 2018 Hi Does this help at all? https://www.air-watch.com/solutions/mobile-device-management/ M
Fraserb82 Posted July 30, 2018 Author Posted July 30, 2018 Hi Markiof, Thanks for the quick reply. Unfortunately the information provided is quite vague as it's a fact sheet from Airwatch. We were hoping to get more specific information elated to any testing that had been done with Promethean and Airwatch so that we would know about any limitations Airwatch has controlling a non-standard Android distro. As an example, we tried to remove Opera but this didn't get removed even thoguh the device had picked up the correct settings and it was all synced up with Airwatch MDM. Thanks Fraser
Achandler Posted July 31, 2018 Posted July 31, 2018 Airwatch tends to have setting per version type. So the settings will just say affects Android 4.1.1 and newer for example. When a 3rd party puts a different front on it, or doesn't use default Apps then it can be a bit of a pain to either re-add them if you remove them by default, or to control them as they open aren't. So quite often mobile phone manufacturers have there our camera/ messenger app etc. It does a half decent job though on most things, I work in a the private sector (well kind of) so we don't have smart boards or the like.
Recommended Posts