TMBS Posted September 18, 2017 Posted September 18, 2017 Hi I know there are different ways to output to projectors and monitors but is there a 'best' way? I have a long classroom where the students at the back can't see the board. I currently have the computer connected using a splitter to the monitor and projector but we want to add another monitor further back so the students at the back can see what's on the board. Can anyone offer advice on the best way to do this? Thanks Tracey
NB9457 Posted September 18, 2017 Posted September 18, 2017 You could get a graphics card with 3 outputs, but this may cause confusion to staff. The easiest way will be to get a 3 way splitter. Some projectors do support a return VGA though, so you may be able to take a feed from the projector to the monitor.
rad Posted September 18, 2017 Posted September 18, 2017 If you have a graphics card installed with two outputs, use splitter and also other output on graphics card set so it duplicates
6Foot2 Posted September 20, 2017 Posted September 20, 2017 Many of our newer machines have VGA, HDMI, and display ports. We have made use of these in several areas of the school (via HDMI-> VGA, and Display Port -> VGA adaptors)
Fazza Posted September 20, 2017 Posted September 20, 2017 Best way is to daisy-chain the projectors to each other. The Epson projectors that we use for example have both and VGA input and VGA output so you can output from the projector to another device.
andyturpie Posted September 20, 2017 Posted September 20, 2017 I would go the same way as Fazza, clone the monitor output to projector one, then use a VGA from the output of projector one into projector 2. Something we used for the first time only about 3 months ago. Works really well.
hardtailstar Posted September 20, 2017 Posted September 20, 2017 I would go the same way as Fazza, clone the monitor output to projector one, then use a VGA from the output of projector one into projector 2. Something we used for the first time only about 3 months ago. Works really well. I agree, we do this in our hall if they want to do lessons with half or whole of a year group
TMBS Posted September 21, 2017 Author Posted September 21, 2017 Thanks everyone for the advice. We'd trying daisy-chaining from the projector and it hadn't work but just tested it again after your advice and realised it was a faulty monitor. All sorted now!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now