Power Connector Pin Diagram/Order

[LeMarchand]

Forgot to disconnect a board before taking it down and pulled the connector apart. Amazingly, it looks as if it isn't properly broken - but I don't know which connectors go where.

 

There appears to be a single "hole", a couple of pins and then a group of 3 "holes". The wires are coloured black (fairly sure this is the one on it's own) and red/yellow(orange?) and brown and terminate in "spears" that will slide into the holes.

 

Anyone know the correct order?

[DangPro]

What board do you have? is it AC2, 300, or 500 version of board? Is this the power connector? Serial connector?

[LeMarchand]

What board do you have? is it AC2, 300, or 500 version of board? Is this the power connector? Serial connector?

 

Power connector; will have to get board number.

[LeMarchand]

Power connector; will have to get board number.

 

Don't have model to hand and not back there until after summer holidays now . It's 78" if that narrows it down!

[DangPro]

It is most likely you have an AC2 board. I don't have the order of the wires to give you but you can find replacements cables at:

 

need-it-now-uk.myshopify.com

Edited July 14, 2016 by DangPro

[LeMarchand]

Cheers - will bear it in mind if I don't get it sorted.

[LeMarchand]

 

One last try before I have to get a part bought. It's a PRM-AB2-01...