sle Posted May 10, 2016 Posted May 10, 2016 Hi Guys, So a student has put a HDD password on one of our machines and we can't remove it! We can access the BIOS ok. Any help appreciated! Thanks
gtg93 Posted May 10, 2016 Posted May 10, 2016 I might be wrong but I was under the impression you can't "crack" a HDD password? It's no help now, but I'd advise getting BIOS passwords set across all machines to prevent it happening again
sle Posted May 10, 2016 Author Posted May 10, 2016 So the only option really is to replace the drive? Don't worry i'm already on the BIOS passwords (a lesson learned the hard way)
difinity Posted May 10, 2016 Posted May 10, 2016 I used these guys a few years ago when drivers were more expensive. HDD Unlock - Overview Both Seagate and WD drives can be unlocked over the serial port. 1
JackCPickup Posted May 10, 2016 Posted May 10, 2016 Used to have a bookmark for a tool that could disable HDD passwords...slim chance but I'll try and find when I'm home.
noelmm Posted May 11, 2016 Posted May 11, 2016 If you are able to access the BIOS you may be able to set the Bios administrator password and then use this password to overwrite the HDD password as this use to be possible (not sure if it is anymore).
sle Posted May 11, 2016 Author Posted May 11, 2016 Any joy? I try HDD unlock but it wouldn't even detect the drive. - - - Updated - - - I tried this tool but unfortunately it wouldn't even detect the drive. Thank you for the tip though! - - - Updated - - - Tried this - no joy, it won't override the HDD password.
Xellpnz Posted May 12, 2016 Posted May 12, 2016 Cracking HDD passwords are a pain. Requires alot of time and effort, and unless your used to forcing your way into a device. I recommend just a replacement.
XiJ Posted May 12, 2016 Posted May 12, 2016 Had a tosh laptop that i need to short a pin or something to remove the password. as I remember it did work. Requires a screwdriver while powering up the HDD though
gady Posted May 12, 2016 Posted May 12, 2016 Removing the bios battery and unplugging all cables should reset it no?
Xellpnz Posted May 12, 2016 Posted May 12, 2016 (edited) Removing the bios battery and unplugging all cables should reset it no? it still keeps on the HDD regardless as its based on the erprom firmware chips. Gets even worse if its on a SSD. IF its really old, it keeps on CMOS. "if" your hard drive is pretty old, attempt a CMOS reset. You can try brute forcing your way in using tools in Herins boot cd, or F4UBCD. Hell even some linux bootable distros you can use some tools to crack in. One i have used in the past is MHDD v4.5, it basically resets the eprom data. But be warned as this can also brick the hard drive. To Original poster, what HDD are we talking about? Do you know how old it is? Edited May 12, 2016 by Xellpnz
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now