Jump to content

Recommended Posts

Posted
An adjunct to the Tubmble Dryer thread : I put a wash into my machine last night and some time later discovered the motor seems to have stopped working. It's an old Bosch machine and I've had 14 years out of it so I can't complain (much!) - but I now need a new machine which can live in an outhouse (so cold in the winter). Anyone care to share what might be good?
Posted

Might be worth pulling the top off and checking the belt's not slipping/hosed. Swapping a belt is a doddle* and might keep it alive for a couple more years.

 

*Your mileage may vary.

  • Thanks 1
Posted
An adjunct to the Tubmble Dryer thread : I put a wash into my machine last night and some time later discovered the motor seems to have stopped working. It's an old Bosch machine and I've had 14 years out of it so I can't complain (much!) - but I now need a new machine which can live in an outhouse (so cold in the winter). Anyone care to share what might be good?

 

What's your budget?

Posted
Might be worth pulling the top off and checking the belt's not slipping/hosed. Swapping a belt is a doddle* and might keep it alive for a couple more years.

*Your mileage may vary.

I didn't hear any motor sounds - just the pump. I'm wondering about repair, it's likely just the brushes on the motor but is it worth repairing a 14 year old machine? (likely cost - either £75 to get someone to do it or £3.50 for brushes if I attempt the DIY (how the heck do carbon brushes even last 14 years on a washing machine)).

Posted
Hadn't thought much about that. Probably £500 ish, tops.

 

Which Best Buys

LG F12B8QDA £279

 

Zanussi ZWF91283W £290

 

Zanussi ZWF91483WR £329

 

Zanussi ZWF81663W £330

 

Zanussi ZWF71463W £348

 

Bosch WAQ28461GB £365

 

Zanussi ZWF71663W £369

 

Bosch WAQ283S1GB £379

 

Bosch WAQ28462GB £400

 

The next few under £500 are all Bosch too... so it looks like you can't go far wrong with Zanussi or Bosch in that price range

  • Thanks 2
Posted
An adjunct to the Tubmble Dryer thread : I put a wash into my machine last night and some time later discovered the motor seems to have stopped working. It's an old Bosch machine and I've had 14 years out of it so I can't complain (much!) - but I now need a new machine which can live in an outhouse (so cold in the winter). Anyone care to share what might be good?

 

It might be worth attempting a repair (or finding someone who can at a reasonable price) but failing that it depends on how much washing you are doing. I have a Hotpoint washer dryer and it cost around £300 and has worked really well, but I only need use it once a week as a rule. If you are washing a ton of stuff every day then it will be worth investing a bit more - Miele for example (I had one and the quality and service is superb).

  • Thanks 1
Posted
id go for diy the brushes on the motor first for the sake of an hours work and £3.50 got to be worth it

Probably! There's a small leak I need to investigate too (having it in the outhouse has made me lazy to look at that). I'm a little worried that with a 14 year old machine it will go again at a really inconvenient time - playing outdoor tennis 3 or 4 times a week through the winter tends to mean lots of layers and lot's of washing. I don't have enough spare kit to go more than a week without doing a wash so an unsuccessful repair eats into that time.

Posted
Can't help on the recommendation but have replaced the brushes on a few machines and its dead easy. It is normally exactly what is wrong in this type of situation as well. The only pain can be trying to get the right ones to fit an older machine, I have had to modify a few in the past to make them fit.
Posted

Having phoned a repairer for a quote (£75 if it was the brushes) and another to see if they had brushes in stock, I booked the afternoon off, and went for the brushes. £30 rather than £3 - that's a "genuine Bosch" premium which seems a bit excessive over the £3 generic items. Post price shock (I'm Scottish, it hurts), I got my hands black with carbon dust and availed myself of the DIY dictionary of choice sweary words and spent a couple of hours figuring out how to get the motor out and new brushes in (ultra fiddly - there must be some clever tool for that). The old brushes still had 5mm or so on them, so I wasn't very hopeful. Put it all back together chucked the load it failed to do last night back in and ... it seems to be working! Perhaps I might get another 14 years out of it yet.

 

Thanks to all for your contributions.

  • Thanks 1
Posted

I just brought a hotpoint sline washing machine 8kg 1400spin.

 

Great so far (had it over a month although the Eco Cotten wash takes 3 hours.... (We just use cottons normal)

 

 

ImageUploadedByEduGeek1448474489.390699.jpg

Posted

Even with 5mm or so left it's likely they weren't making enough contact to make it work.

 

Recently replaced the brushes on ours the drum would turn but not spin.

 

Ben

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...